Bosch Refrigerator Error Code 3-2-2

Error code 3-2-2 on a Bosch refrigerator indicates that the ice maker motor has been detected as faulty. The control board monitors the ice maker drive motor and triggers this code when the motor fails to operate correctly. Ice production will stop until the fault is resolved. The motor is not replaceable on its own, so a confirmed failure requires full ice maker assembly replacement.

A homeowner or technician can start by performing a power cycle and checking for any ice jams or obstructions around the ejector arms, as these steps require no parts. If the error persists, the ice maker assembly will need to be replaced. Because the motor is integrated into the assembly and is not separately serviceable, replacing the full unit is the only repair path available.

If the issue is a transient fault resolved by a power cycle, there is no parts cost. If the ice maker assembly requires replacement, parts costs typically range from $80 to $200 depending on the specific Bosch model. Adding professional labor for diagnosis and installation can bring the total repair cost to a range of $150 to $400 or more, depending on your location and service provider.

Switching the appliance off and back on is the recommended first diagnostic step and may clear the code if the fault was caused by a transient electrical issue or a momentary motor stall. However, if the 3-2-2 code reappears after the power cycle, the motor has a confirmed fault that will not be resolved by resetting. In that case, the ice maker assembly must be replaced.

Yes, the 3-2-2 error is specific to the ice maker motor and does not affect the refrigerator or freezer cooling functions. Your food will remain properly refrigerated and frozen. The only impact is that ice production will be inactive until the ice maker is repaired or replaced.