Electrolux Refrigerator Error Code 92

Error code 92 on an Electrolux refrigerator indicates that the control board has detected a shorted + button on the Perfect Temperature Drawer. This means the circuit tied to that button is registering a constant closed signal, as if the button is being held down continuously. It can be caused by a stuck button, moisture in the control panel, a faulty keypad assembly, or a wiring issue.

A power reset may temporarily clear error code 92, but if the underlying short condition in the + button circuit still exists, the code will return. Resetting the appliance is a reasonable first troubleshooting step, but a persistent error means the root cause needs to be identified and repaired before the code will stay cleared.

Repair costs for error code 92 vary depending on the root cause. A replacement membrane keypad or drawer control panel assembly typically ranges from $30 to $100 or more for parts alone. If a technician is needed for diagnosis and installation, total repair costs including labor could range from $100 to $300 or higher depending on your location and the parts required.

Some causes of error code 92 can be addressed without professional help, such as cleaning moisture or debris from around the Perfect Temperature Drawer control panel. However, if the button, membrane switch, or wiring harness is physically damaged, those components will need to be replaced. If you are not comfortable working with appliance wiring and control panels, it is best to contact a qualified technician.

Error code 92 is not typically a safety hazard, but it does indicate an electrical fault in the drawer's control interface. The main concern is that the Perfect Temperature Drawer may not regulate its temperature correctly while the fault is active, which could affect food stored in that compartment. Addressing the issue promptly will prevent potential food safety problems.