Electrolux Refrigerator Error Code 95

Error code 95 means the refrigerator has detected a shorted control lock key or button on the Perfect Temperature Drawer. This indicates the button is registering a continuous input signal, as if it is stuck in the pressed position. The fault is detected by the main control board monitoring the PTD panel inputs. The drawer controls may behave erratically or become unresponsive while this error is active.

A power reset by unplugging the refrigerator for several minutes may temporarily clear the error display, but the code will return if the underlying shorted button or wiring issue is not corrected. A reset does not fix the root cause. Persistent return of code 95 after a reset confirms that the physical fault needs to be diagnosed and repaired.

Repair costs vary depending on the root cause. If the fix involves cleaning connectors or reseating a harness, the cost may be minimal aside from a service call fee, which typically ranges from $75 to $150. If a new PTD control panel, button assembly, or control board is needed, parts and labor combined can range from $150 to $400 or more depending on part availability and your location.

Some causes of error code 95 are approachable for a confident DIYer. You can inspect the control lock button for physical sticking, check the wiring harness for visible damage, and clean or reseat the connector between the PTD panel and the main harness. If the button assembly or PTD control board needs replacement, you will need to source the correct parts and have basic appliance repair skills to complete the repair safely.

Error code 95 is not a direct safety hazard in the traditional sense. However, if the Perfect Temperature Drawer controls are not functioning correctly, the drawer may not maintain its set temperature accurately, which could affect food safety in that compartment. Addressing the error promptly helps ensure the drawer operates as intended and keeps food at the correct temperature.