Electrolux Refrigerator Error Code AF

The AF code on an Electrolux refrigerator is a routine maintenance reminder indicating that six months have passed since the PureAdvantage air filter was last replaced and reset. It is not an error or a sign that the refrigerator is malfunctioning. The refrigerator will continue to operate normally while this code is displayed. Replacing the filter and resetting the reminder will clear the code.

Yes, it is safe to continue using your refrigerator while the AF code is displayed. The code is a maintenance reminder and does not indicate any problem with cooling, electrical components, or food safety. However, the air filter inside the compartment will be less effective at controlling odors the longer it goes without replacement.

Yes, performing the reset by holding the On/Off and minus keys for three seconds will clear the AF display even if the filter has not been replaced. However, the existing filter will continue to lose effectiveness at absorbing odors, and the six-month reminder will simply restart from that point forward. For proper odor control performance, replacing the filter before resetting the reminder is strongly recommended.

To clear the AF code, first replace the PureAdvantage air filter using Part 241754001. Once the new filter is installed, press and hold both the On/Off and minus keys at the same time for three seconds to reset the timer. The AF code should disappear after the reset is completed successfully. Skipping the filter replacement and only resetting the reminder will clear the display but will not restore full filter performance.

The cost to resolve the AF code is limited to the price of a replacement PureAdvantage air filter, which typically ranges from around 10 to 25 dollars depending on the retailer. No tools or professional service are required for filter replacement or the keypad reset procedure. This is one of the least expensive maintenance tasks associated with this refrigerator.