mypros+
Error code reference

Electrolux Refrigerator Error Code E1

Ice maker mold heater failure (Finger Evaporator ice maker).

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E1 error code actually means

Your Electrolux refrigerator's ice maker has detected a problem with the small heater inside the ice mold that helps pop the ice cubes loose. Because of this fault, the ice maker may stop producing ice entirely. A technician will need to test and likely replace the heater component or related wiring to fix the issue.

Diagnostic procedure

The full E1 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
See Flow Chart Test #54C for mold heater diagnostics.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E1 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E1

Ranked by how often they cause this code
  1. 1Failed mold heater element
  2. 2Damaged or corroded wiring harness
  3. 3Faulty ice maker control module
  4. 4Loose or disconnected connector
  5. 5Ice buildup blocking the mold heater area

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E1

What does E1 mean on a Electrolux refrigerator?
The E1 code on an Electrolux refrigerator specifically refers to a mold heater failure in the Finger Evaporator ice maker. The mold heater is responsible for releasing formed ice cubes from the mold during the harvest cycle. When the control detects the heater circuit is not functioning correctly, it triggers E1 and may stop ice production. Diagnostics should follow Flow Chart Test 54C to isolate the exact point of failure.
Is it safe to use my Electrolux refrigerator while the E1 code is active?
The E1 code is specific to the ice maker mold heater circuit and does not affect the main refrigeration or freezing systems. Your food should remain safely chilled and frozen while this code is present. However, the ice maker will likely not produce ice until the fault is resolved, so you should plan on an alternative ice source in the meantime.
Will resetting my Electrolux refrigerator clear the E1 error code?
A reset may temporarily clear the E1 code from the display, but if the underlying mold heater fault has not been corrected, the code will return once the ice maker attempts its next harvest cycle. Resetting is not a fix, it is only useful as a first step to confirm whether the fault is persistent. Proper diagnosis using Flow Chart Test 54C is needed to identify and correct the actual cause.
Can I fix the E1 error on my Electrolux refrigerator myself?
Some basic checks, such as inspecting and reseating wiring connectors or defrosting a heavily iced-up ice maker, can be done by a knowledgeable DIYer. However, testing the mold heater element for continuity and evaluating the ice maker module requires a multimeter and familiarity with appliance electrical circuits. If the heater element or control module needs replacement, many homeowners prefer to have a qualified technician handle the repair to avoid additional damage.
How much does it cost to repair an E1 error on an Electrolux refrigerator?
Repair costs vary depending on which component has failed. A replacement mold heater element typically costs in the range of $20 to $60 for the part alone, while a new ice maker module can range from $60 to $150 or more. Adding labor for a service technician, total repair costs generally fall between $100 and $300, depending on your location and the extent of the fault.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass