Electrolux Refrigerator Error Code F

The F error code means the Electronic Expansion Valve (EEV) failed its self-test. During a 120-second diagnostic routine, the refrigerator checks whether temperatures drop sufficiently when the EEV is activated. If the required temperature drop does not occur within that window, the F code is triggered. This points to a problem with the EEV, its coil, associated wiring, or the TH3 temperature sensor connector.

A power reset may temporarily clear the displayed code, but it will not fix the underlying problem. If the EEV continues to fail its 120-second test, the F code will return. The root cause, whether moisture, a wiring fault, or a failed component, must be identified and corrected before the error will stay cleared.

Repair costs vary depending on what is causing the fault. If the fix involves only cleaning connectors and applying dielectric grease, costs may be limited to a service call fee, typically in the range of $75 to $150. If the EEV coil or Ice Maker Control Board requires replacement, total repair costs including parts and labor can range from $200 to $500 or more, depending on parts availability and local labor rates.

Some steps are accessible to a knowledgeable DIYer, including inspecting the EEV coil for moisture, drying it out, cleaning the connectors, and applying dielectric grease. Checking the TH3 connector for corrosion or moisture is also straightforward. However, if wiring repairs or component replacement are needed, a qualified technician is recommended to ensure the refrigerant system and control board are handled correctly.

A failed EEV means the refrigerator may not be cooling efficiently or maintaining proper temperatures in one or more compartments. Continuing to run the appliance in this condition risks food spoilage and may put additional strain on the compressor over time. It is best to address the fault promptly rather than continue operating the unit with the error active.