Electrolux Refrigerator Error Code HI F

HI F means the Perfect Temp Drawer exceeded its allowable over-temperature timeout, indicating the compartment stayed too warm for too long. The control board monitors the drawer's temperature continuously, and when it cannot reach the set point within the designated time, it triggers this fault. The error points to a problem with one or more of the three key components: the PTD thermistor, the heater, or the damper that controls airflow into the drawer.

The HI F code is specific to the Perfect Temp Drawer, meaning the main fresh food and freezer compartments may still be operating normally. However, food stored in the Perfect Temp Drawer may not be held at a safe or intended temperature, so perishables in that compartment should be moved until the issue is resolved. Do not rely on the drawer to preserve meat, dairy, or other temperature-sensitive items while the fault is active.

Repair costs vary depending on which component has failed and whether you hire a technician or perform the work yourself. A replacement thermistor or damper actuator typically falls in the range of $20 to $80 for the part alone, while a heater assembly may cost somewhat more. Adding labor charges, a professional repair for this fault commonly runs in the range of $100 to $300 depending on your location and the specific parts required.

Some basic checks are within reach for a capable DIYer, such as inspecting the drawer gasket for damage, clearing any ice buildup around the damper, and confirming the drawer closes properly. However, testing the thermistor resistance, checking heater continuity, and diagnosing damper actuator operation typically requires a multimeter and some familiarity with appliance wiring. If component replacement is needed, a qualified technician is recommended for accurate diagnosis and safe repair.

A power reset may temporarily clear the HI F code, but if the underlying cause such as a failed thermistor, faulty damper, or heater issue is not corrected, the error will return. Resetting the appliance is a reasonable first step to confirm whether the fault is persistent, but it should not be treated as a fix. If the code reappears after the reset, the components associated with the Perfect Temp Drawer need to be tested and repaired.