Error code reference

Electrolux Refrigerator Error Code PF

The dishwasher control has lost power and the power has been restored (also indicated by flashing High Temp…

Electrolux codesElectrolux refrigerator codes

The dishwasher control has lost power and the power has been restored (also indicated by flashing High Temp Wash & Air Dry Lights).

MyPros+ Max

Get the full diagnostic procedure for PF.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What PF means on a Electrolux refrigerator

The PF error code on an Electrolux refrigerator indicates a power failure event. The control board detected that power to the unit was interrupted and has since been restored. This is a notification code rather than a fault code tied to a failed component. It is often accompanied by flashing High Temp Wash and Air Dry indicator lights, which serve as a secondary visual alert that the appliance lost power at some point during operation.

For homeowners, PF simply means the refrigerator lost power at some point, whether from a tripped circuit breaker, a brief utility outage, an unplugged cord, or a loose connection at the outlet, and it is now back on. The unit is alerting you so you can check whether food temperatures were affected during the outage. The code itself does not mean anything is broken inside the refrigerator.

If PF appears repeatedly without any known power outages, the cause may be an intermittent connection at the wall outlet, a failing power cord, or an unstable circuit. In those cases, the underlying electrical issue should be investigated to prevent future interruptions and potential food spoilage.

Source: manufacturer service documentation.

Common causes of PF

  1. 01

    Power outage or utility interruption

    Wiring / connection

    A brief or extended loss of power from the utility grid interrupts power to the control board. When power returns, the board displays PF to log that the interruption occurred.

  2. 02

    Tripped circuit breaker or blown fuse

    Wiring / connection

    A tripped breaker or blown fuse on the refrigerator's dedicated circuit cuts power to the unit. Resetting the breaker or replacing the fuse restores power and triggers the PF notification.

  3. 03

    Loose or intermittent connection at wall outlet

    Wiring / connection

    A loose power cord plug or a worn wall outlet can cause repeated, momentary power interruptions that repeatedly trigger the PF code even without a full outage.

  4. 04

    Damaged or failing power cord

    Part replacement

    A frayed, pinched, or internally failing power cord can cause intermittent power loss to the control board, triggering PF each time the connection drops and restores.

See the test procedure for each cause

Frequently asked questions about PF

What does PF mean on an Electrolux refrigerator?
PF stands for Power Failure. It means the refrigerator's control board lost power at some point and power has since been restored. The code is a notification, not a malfunction. You can clear it by pressing any button on the control panel or by consulting your model's manual for the specific reset sequence.
Is it safe to use my Electrolux refrigerator when PF is displayed?
Yes, the refrigerator is safe to use when PF is displayed. The unit is fully operational and the code is only alerting you that a power interruption occurred. Check the internal temperature and inspect any perishable food that may have been affected during the outage before consuming it.
How do I fix the PF error code on my Electrolux refrigerator?
If PF appeared after a single power outage or breaker trip, simply acknowledge the code by pressing a control panel button to clear it, then verify the refrigerator is cooling normally. If PF keeps coming back without a known outage, check that the power cord is fully seated in the outlet, test the outlet with another device, and inspect the cord for damage. A repeatedly returning PF code points to an unstable power connection that should be addressed by an electrician or appliance technician.
Why are the High Temp Wash and Air Dry lights flashing along with PF on my Electrolux refrigerator?
The flashing High Temp Wash and Air Dry indicator lights are a secondary visual alert tied to the PF power failure notification. Both the code and the flashing lights are triggered simultaneously by the same event: the control board detecting that power was lost and restored. Clearing the PF code should also stop the lights from flashing.
How much does it cost to fix a PF error code on an Electrolux refrigerator?
In most cases, PF costs nothing to fix because it simply requires clearing the code after a power outage or tripped breaker. If the code is caused by a faulty wall outlet, an electrician visit typically runs $75 to $150. If the power cord is damaged and needs replacement, parts and labor from an appliance technician generally range from $100 to $200 depending on your location and the specific model.

Related Electrolux refrigerator codes

All Electrolux refrigerator codes
View all 92 Electrolux refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass