mypros+
Error code reference

Frigidaire Range Error Code Prob Too Hot

The probe sensor temperature has exceeded 121°C (250°F); if it reaches 149°C (300°F) or higher, the oven will automatically shut off.

Frigidaire codesFrigidaire range codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the Prob Too Hot error code actually means

This message means the temperature sensor (the metal probe you insert into food) is reading a temperature that is too high, usually because the probe is not fully buried inside the food and is measuring the hot oven air instead. If cooking is finished, simply press CANCEL and remove the probe and food from the oven. If the temperature keeps rising to 300°F, the oven will shut itself off automatically to prevent damage.

Diagnostic procedure

The full Prob Too Hot procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Ensure the probe sensor is fully covered by the food. If the food is done cooking, press CANCEL and remove the probe and food from the oven.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock Prob Too Hot procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of Prob Too Hot

Ranked by how often they cause this code
  1. 1Probe not fully inserted into food
  2. 2Food is fully cooked and probe temperature has risen with it
  3. 3Probe tip touching a bone, pan, or oven rack
  4. 4Damaged or faulty probe sensor
  5. 5Probe connector not fully seated at the oven port

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about Prob Too Hot

What does Prob Too Hot mean on a Frigidaire range?
It means the meat probe sensor has detected a temperature above 121°C (250°F). This most commonly happens when the probe tip is not fully surrounded by food and is instead exposed to hot oven air. The oven will shut off automatically if the probe reaches 149°C (300°F) or higher. It is a warning condition, not a component failure in most cases.
Is it safe to keep using my Frigidaire range when Prob Too Hot appears?
The error is a warning that the probe is reading an unusually high temperature. The oven has a built-in safety shutoff that activates at 149°C (300°F) to prevent damage. You should address the probe placement issue before continuing to cook. There is no immediate danger, but ignoring the alert can result in the oven shutting off mid-cook or potential damage to the probe cable over time.
How much does it cost to replace a Frigidaire oven probe sensor?
Replacement meat probe sensors for Frigidaire ranges typically cost between $20 and $60 for the part, depending on the specific model. If a technician is needed to diagnose or assist with the repair, service call and labor fees generally range from $75 to $150 or more. In most cases, a probe replacement is a straightforward DIY repair that only requires unplugging the old probe and connecting the new one.
How do I fix the Prob Too Hot error on my Frigidaire range?
First, check that the probe is fully inserted into the thickest part of the food with the tip completely covered. Also confirm the probe tip is not touching a bone, pan wall, or oven rack. If the food is already cooked, press CANCEL and remove the probe and food from the oven. If the error persists with correct probe placement, the probe itself may need to be replaced.
Will pressing CANCEL or resetting the oven clear the Prob Too Hot error?
Pressing CANCEL will clear the alert and stop the cooking cycle. However, if you restart the oven with the probe still incorrectly placed, the error will return. The underlying cause, typically probe placement, must be corrected before resuming probe-assisted cooking. If a faulty probe is causing the issue, replacing the probe is necessary to prevent the error from recurring.

Related Frigidaire range error codes

All Frigidaire range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass