Frigidaire Range Error Code SAb

SAb on a Frigidaire range means Sabbath Mode is currently active. This is a built-in feature that keeps the oven baking continuously at the set temperature without requiring any user interaction to maintain operation. It also suppresses audible alerts and modifies certain display and light behaviors. It is not a fault code and does not indicate any problem with the appliance.

Sabbath Mode is a factory-designed feature intended for extended continuous baking, so the oven is built to operate safely in this state. However, standard oven safety practices still apply: keep the area around the oven clear, never leave the home for extended periods without ensuring appropriate precautions are in place, and make sure the oven is functioning at the correct set temperature.

No, SAb does not indicate a failed component or a condition that requires a technician or replacement parts. It is a status message confirming that a specific operating mode is active. The cost to resolve it is zero, as it only requires pressing the correct button combination to deactivate. If the oven does not respond to the deactivation sequence after multiple attempts, then further diagnosis of the control board or keypad may be warranted.

To deactivate Sabbath Mode, press and hold both the bake time pad and the delay start pad at the same time for at least 3 seconds. The SAb indicator should disappear from the display once the mode has been successfully cancelled. If the display does not clear, repeat the key press sequence and hold for the full duration.

A standard power reset by unplugging the range or tripping the circuit breaker may not permanently clear Sabbath Mode, as the control board can restore the mode state after power is restored depending on the model. The correct way to exit Sabbath Mode is to use the designated deactivation sequence: press and hold the bake time and delay start pads simultaneously for at least 3 seconds.