Error code reference

GE Monogram Range Error Code F-

Oven function error code displayed as F- followed by a number, indicating a malfunction in the oven control…

GE Monogram codes GE Monogram range codes

Oven function error code displayed as F- followed by a number, indicating a malfunction in the oven control system.

First step from the service manual

Turn the Oven Mode Selector and the Temperature knobs to OFF. Allow the oven to cool for one hour. Put the oven back into operation. If the code repeats, disconnect all power to the oven for 30 seconds and then reconnect power. If the code repeats again, call for service.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F-.

Step-by-step tests with expected resistance, voltage, and continuity values
Wiring diagram references and connector pinouts from the OEM service manual
Verified part numbers when replacement is required

Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·GE Monogram Range

F- on my GE Monogram Range

M+

Oven function error code displayed as F

From Service Manual 859578, p.30:

1.Turn the Oven Mode Selector and the Temperature knobs to OFF. Allow the oven to cool for one hour. Put the oven back into operation. If the code repeats, disconnect all power to the oven for 30 seconds and then reconnect power. If the code repeats again, call for service.

2.Measure line voltage at the power cord terminal block. Expected: 120 VAC (L1 to neutral) or 208 to 240 VAC between L1 and L2 under load.

3.Inspect the cord strain relief and terminal block screws for signs of arcing or heat discoloration. Loose connections here mimic an intermittent power failure to the control board.

Part W10911048

Power cord assembly

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass