LG Dryer Error Code d95

The d95 code means the dryer's exhaust ductwork is approximately 90 to 95 percent blocked, severely restricting airflow out of the machine. LG designed this alert to appear for a two-hour display window to prompt immediate action. The dryer should not be used again until the full exhaust system has been inspected and cleared of all restrictions.

No. A 90 to 95 percent blocked exhaust duct is a serious fire hazard and the dryer should be stopped immediately. Blocked dryer vents trap heat inside the drum and duct, which can ignite accumulated lint. Do not operate the dryer again until the exhaust system has been fully cleaned and confirmed to be unobstructed.

If the fix only requires cleaning the duct run yourself, costs are minimal, typically the price of a dryer duct cleaning brush kit in the range of $15 to $40. Professional dryer vent cleaning services generally range from $80 to $175 depending on your location and duct length. If duct sections need to be replaced or the duct path needs to be reconfigured, material and labor costs can range from $100 to $300 or more depending on the complexity of the installation.

Start by disconnecting the dryer and inspecting the entire duct run from the back of the dryer to the exterior vent cap. Clean out lint accumulation using a rotary duct brush kit or a vacuum with a long hose attachment. Check the exterior vent flap to confirm it opens and closes properly, and replace any crushed, kinked, or damaged duct sections with rigid metal duct before running the dryer again.

Resetting the dryer may temporarily clear the code from the display, but it will not resolve the underlying blockage. The d95 alert is tied to an actual airflow restriction detected by the dryer's sensors, so the code will return once the dryer is running again if the ductwork has not been cleaned and repaired. The only way to permanently clear the error is to fix the exhaust system.