mypros+
Error code reference

LG Heat Pump Error Code E416

Outdoor unit discharge temperature 1 protection control.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E416 error code actually means

Your LG heat pump has detected dangerously high temperatures at the point where refrigerant exits the compressor, so it has shut down to protect itself from damage. This is usually caused by low refrigerant levels or a valve that is not fully open, both of which put extra stress on the compressor. A technician will need to inspect the refrigerant charge and service valves to get the system running safely again.

Diagnostic procedure

The full E416 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check service valves and refrigerant charge.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E416 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E416

Ranked by how often they cause this code
  1. 1Low refrigerant charge
  2. 2Closed or partially closed service valves
  3. 3Restricted or dirty condenser coil
  4. 4Outdoor fan motor failure
  5. 5Faulty discharge temperature sensor

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E416

What does E416 mean on a LG heat_pump?
E416 indicates that the outdoor unit discharge temperature sensor 1 has detected temperatures beyond the safe operating limit, activating a protection control shutdown. The discharge line carries hot, high-pressure refrigerant vapor out of the compressor, and excessive temperatures there can cause serious compressor damage. The system locks out to prevent component failure until the underlying cause is resolved.
Is it safe to keep running my LG heat pump when E416 appears?
No. The E416 protection control is designed to shut the system down before compressor damage occurs, and attempting to bypass or ignore it risks destroying the compressor. Continued operation under high discharge temperature conditions can also degrade compressor oil, leading to costly internal wear. Leave the system off until a technician has diagnosed and corrected the problem.
How much does it cost to repair an E416 error on an LG heat pump?
Repair costs vary depending on the cause. Service valve adjustment or a coil cleaning may cost relatively little in labor, typically in the range of $75 to $200. Refrigerant leak repair and recharge can range from $200 to $600 or more depending on the refrigerant type and amount needed. An outdoor fan motor replacement generally runs $150 to $450 in parts and labor, while compressor replacement, if damage has already occurred, can range from $800 to $2,500 or higher.
Can I fix E416 on my LG heat pump myself?
Some contributing factors, such as clearing debris from the outdoor coil or confirming that service valves are fully open, can be checked without special tools. However, diagnosing and correcting refrigerant charge issues requires EPA-certified equipment and training to handle refrigerants legally and safely. For most homeowners, calling a licensed HVAC technician is the recommended path.
Will resetting the unit clear the E416 error code?
A power reset may temporarily clear the code and allow the unit to restart, but if the root cause, such as low refrigerant or restricted airflow, has not been corrected, the E416 error will return quickly. Repeated reset attempts without addressing the underlying issue risk compressor damage. A proper repair of the fault condition is required for a lasting resolution.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass