Miele Washer Error Code F4026

F4026 indicates that the Miele washer has completed its wash program and is currently running the anti-crease action cycle. This is a post-wash feature that intermittently tumbles the drum to prevent wrinkles from setting in the laundry. It is a status message, not a fault or error. Opening the door and removing the laundry will clear the display.

Yes, F4026 is safe to leave running temporarily. The anti-crease cycle uses only gentle, intermittent drum tumbling and consumes minimal energy. However, leaving laundry in the drum for extended periods is not ideal for fabric care, so it is best to remove the load as soon as convenient.

In the vast majority of cases, F4026 requires no repair and therefore no cost. If the code is caused by a faulty door latch preventing laundry removal, door lock assembly replacement on a Miele washer typically costs in the range of $80 to $200 including parts and labor. If a control board issue is diagnosed, repair or replacement costs can range from $200 to $500 or more depending on the specific model.

No repair is needed for F4026 in most cases. Open the washer door and remove your laundry, and the status indication will clear on its own. If the door will not open or the code persists after the laundry has been removed, check the door latch assembly and consider contacting a technician to inspect the control board.

A power reset is generally not necessary to clear F4026. Simply opening the door and removing the laundry is the intended way to exit the anti-crease cycle and clear the status display. If a reset is needed due to a persistent display issue, turning the machine off at the power source for a few minutes and restarting it should clear the indication.