Sharp Range Error Code ERROR

This error indicates that the absolute humidity (AH) sensor did not detect water vapor from the food during a sensor cooking cycle, or that the bridge circuit used to read the sensor cannot be balanced due to a sensor disconnection or failure. The range uses this sensor to automatically judge cooking progress. The appliance will not complete a sensor cooking cycle until the underlying issue is resolved.

You may still be able to use manual cooking modes that do not rely on the humidity sensor, but sensor cooking functions will not operate correctly while this error is present. It is best to avoid using sensor cooking modes until the fault is repaired, as the appliance cannot properly judge doneness without a functioning AH sensor.

A power reset may temporarily clear the error display, but the code will return as soon as a sensor cooking cycle is attempted if the underlying hardware fault has not been corrected. Resetting the unit does not repair a failed sensor or a broken wiring connection. The AH sensor or control unit must be inspected and corrected to permanently resolve the error.

Some steps can be taken without professional help, such as checking that the sensor port is not blocked and inspecting the sensor's wiring connector for looseness or visible damage. However, replacing the AH sensor or diagnosing a control unit fault typically requires disassembling the appliance and working with internal components. If you are not comfortable with appliance repair, a qualified technician should handle the replacement.

Repair costs vary depending on whether the AH sensor alone needs replacement or if the control unit is also involved. AH sensor replacement is generally the less expensive repair, while control board replacement adds significantly to parts and labor costs. Total repair costs typically range from around $75 to $350 or more depending on the parts required and local labor rates.