mypros+
Error code reference

Wolf Cooktop Error Code IR

Indicates the Remote Control has been activated or deactivated (Black Hoods).

Wolf codesWolf cooktop codes

Indicates the Remote Control has been activated or deactivated (Black Hoods).

MyPros+ Max

Get the full diagnostic procedure for IR.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What IR means on a Wolf cooktop

The IR indicator on a Wolf cooktop with Black Hood ventilation signals that the Remote Control function has been either activated or deactivated. This is not a fault code in the traditional sense. It is a status notification tied to the cooktop's integrated communication with compatible Wolf Black Hood ventilation systems. The IR designation refers to the infrared or remote signaling protocol that allows the cooktop to automatically control the hood's fan speed and operation based on cooking activity.

When the Remote Control feature is toggled on or off, the cooktop displays IR to confirm the state change. This communication link allows the hood to respond automatically to burner use, adjusting ventilation without manual input from the user. The feature is intentionally designed to be enabled or disabled depending on user preference or installation configuration, which is why the indicator appears during normal operation rather than indicating a malfunction.

If the IR indicator appears unexpectedly or persists in an undesired state, the most likely explanation is an accidental activation or deactivation of the remote control setting through the cooktop's control interface. No component failure is necessarily implied by this indicator. Technicians should confirm whether the customer intended the current remote control state and walk through the proper control sequence to toggle the feature back to the preferred setting.

Source: manufacturer service documentation.

Common causes of IR

  1. 01

    Accidental toggling of Remote Control setting

    Wiring / connection

    The most frequent reason for the IR indicator is an unintentional activation or deactivation of the remote control feature through the cooktop's control panel. Reviewing the control sequence in the cooktop settings can confirm and reverse the change.

  2. 02

    Intentional Remote Control configuration change

    Wiring / connection

    During installation or after a service visit, the remote control setting may be deliberately adjusted to match the customer's ventilation setup. The IR indicator confirms this configuration change was successfully applied.

  3. 03

    Control panel button combination activated inadvertently

    Wiring / connection

    Certain button combinations on Wolf cooktops can toggle the remote hood control feature. Cleaning the cooktop surface or leaning against controls can sometimes trigger this unintentionally.

  4. 04

    Incompatible or disconnected Black Hood system

    Wiring / connection

    If the cooktop is configured for remote hood control but the Black Hood is not properly connected or is incompatible, toggling the feature may produce the IR indicator without the expected hood response.

See the test procedure for each cause

Frequently asked questions about IR

What does IR mean on a Wolf cooktop?
IR on a Wolf cooktop indicates that the Remote Control feature for compatible Black Hood ventilation systems has been activated or deactivated. It is a status notification, not a fault code. The cooktop is confirming a change in the communication setting between the cooktop and the hood. No repair is required when this indicator appears as part of a normal setting change.
How do I fix the IR indicator on my Wolf cooktop?
Since IR is a status notification rather than an error, no repair is typically needed. If the remote control setting is not in the desired state, use the cooktop's control interface to toggle the feature back to your preferred configuration. Consult the cooktop's operating guide for the specific button sequence used to enable or disable the Black Hood remote control function.
Is it safe to use my Wolf cooktop when IR is displayed?
Yes, the IR indicator does not indicate a safety issue or a malfunction. The cooktop remains fully operational when this notification is displayed. It simply reflects the current state of the remote hood control setting and does not affect the cooktop's heating or ignition functions.
How much does it cost to repair an IR code issue on a Wolf cooktop?
Because IR is a status indicator and not a component failure code, there is typically no repair cost associated with it. If a technician visit is needed to reconfigure the remote control setting or diagnose an unexpected behavior related to the Black Hood communication, service call fees generally range from $80 to $150 depending on the region and service provider.
Will resetting my Wolf cooktop clear the IR indicator?
A power cycle or reset may clear the IR indicator from the display temporarily, but the underlying remote control setting will remain in whatever state it was last configured. To permanently change the setting, the remote control feature must be toggled through the cooktop's control panel using the appropriate sequence for your model.

Related Wolf cooktop codes

All Wolf cooktop codes
View all 124 Wolf cooktop codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass