mypros+
Model reference

Amana SRCF30-U01A/P69172-1C

Air Conditioner

2 documents35 error codes43 service modes

Available documentation

Service Manual

  • Job Aid - MC-228 pg
    Covers this model

Installation Guide

  • Installation Instructions44 pg
    Covers this model
MyPros+ Max

Diagnose your Amana SRCF30-U01A/P69172-1C.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (35)

CodeMeaning
1c1cShorted key detected on control board.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem (upper oven / single cavity).1c32Cancel key circuit problem (lower oven).1c4cMicro communication failure on control board.1c5cVCC or ground fault on control board.1c6cEEPROM error1c7cControl not calibrated1c81EEPROM CRC error in upper cavity cook profile data.1c8cCooking program error1d11Runaway oven temperature (650°F) with door unlocked (upper oven / single…1d12Runaway oven temperature (650°F) with door unlocked (lower oven).1d21Runaway oven temperature (950°F) with door locked (upper oven / single cavity).1d22Runaway oven temperature (950°F) with door locked (lower oven).3d11Temperature sensor open circuit (upper oven / single cavity).3d12Temperature sensor open circuit (lower oven).3d21Temperature sensor shorted (upper oven / single cavity).3d22Temperature sensor shorted (lower oven).3d41Meat probe shorted during active probe cook mode.3d51Meat probe not calibrated; detected during active probe cook mode.4d11Door switch position failure4d12Door switch position failure4d21No reverse airflow fan rotation (no or low RPM).4d31Reverse airflow fan is on when it should be off.4d41Cooling fan overspeed detected during active cook or clean mode.4d51Door switch circuit failure4d52Door switch circuit failure9d11Door latch will not lock (upper oven / single cavity).9d12Door latch will not lock (lower oven).9d21Door latch will not unlock (upper oven / single cavity).
View all 35 error codes

Service modes (43)

  • 24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
  • 24 Hour Clock Toggle (MER6875AC*)Press and hold Upper Cancel and Favorite pads for 3 seconds.
  • 24-Hour Clock TogglePress and hold Cancel and Favorite pads for 3 to 5 seconds.
  • Beeper Volume Adjustment (MER6555AC*, MER6755AC*, MER6775AC*)Hold Upper Cancel and More+ pads for 3 seconds.
  • Beeper Volume Adjustment (MER6875AC*)Hold Upper Cancel and Delay pads for 3 seconds.
  • Child Lock OutPress and hold Upper Cancel and Cook & Hold pads for 3 seconds
  • Child LockoutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds
  • Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
  • Clock Display Toggle (MER6875AC*)Press and hold Upper Cancel and Clock pads for 3 seconds.
  • Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 to 5 seconds.
  • Control Reset Mode["Enter Service Mode.","Press the down arrow repeatedly (right ATM key) until {CONTROL RESET} is…
  • Demo Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Less- pads for 3 seconds.
  • Diagnostic Code Display["Apply power to the unit.","Press and hold the Up Arrow pad for 3 to 5 seconds when applying power…
  • Diagnostic Code Display ModePress and hold AUTOSET pad for 3 to 5 seconds while applying power to the range (at power-up only)
  • Diagnostic Code Display Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold UPPER CANCEL and TIMER pads for 3 seconds within 5 minutes of power up
  • Diagnostic Code Display Mode (MER6875AC*)Press and hold UPPER CANCEL and AUTOSET pads for 3 seconds
  • Display Test Mode["Enter Service Mode.","Press the down arrow repeatedly (right ATM key) until {DISPLAY TEST} is…
  • Engineering Mode["Enter Service Mode.","Press the {ENGINEERING} ATM key.","Press {ON}.","Press [SETUP]."]
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds.
  • Factory Default Reset (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Warm pads for 3 seconds.
  • Factory Default Reset (MER6875AC*)Press and hold Upper Cancel and Upper Keep Warm pads for 3 seconds.
  • Faults Mode["Enter Service Mode.","Press the down arrow repeatedly (right ATM key) until {FAULTS} is…
  • Keypad Lockout["Press and hold Cancel and Timer pads for 3 to 5 seconds.","Press Up or Down Arrow pads to…
  • One-Watt Standby Mode["Press and hold Cancel and Down Arrow pads for 3 to 5 seconds."]
  • Oven Temperature Adjustment1
  • Oven Temperature Adjustment - Lower Oven (MER6555AC*, MER6755AC*, MER6775AC*)1
  • Oven Temperature Adjustment - Lower Oven (MER6875AC*)1
  • Oven Temperature Adjustment - Upper Oven (MER6555AC*, MER6755AC*, MER6775AC*)1
  • Oven Temperature Adjustment - Upper Oven (MER6875AC*)1
  • Quick Test1
  • Quick Test Mode1
  • Quick Test Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold UPPER CANCEL and TIMER pads for 3 seconds within 5 minutes of power-up.
  • Quick Test Mode (MER6875AC*)Press and hold UPPER CANCEL and UPPER BROIL pads for 3 seconds within 5 minutes of power-up
  • Sabbath ModeInitiate desired bake function first, then hold CLOCK pad for 3 to 5 seconds to activate.
  • Sabbath Mode (MER6555AC*, MER6755AC*, MER6775AC*)Hold Clock pad for 5 seconds to activate Sabbath mode
  • Sabbath Mode (MER6875AC*)Hold Clock pad for 3 to 5 seconds to activate Sabbath mode.
  • Service Mode["Method 1
  • Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press Up or Down Arrow pads to toggle…
  • Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
  • Temperature Display Toggle (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Temperature Display Toggle (MER6875AC*)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Test Mode (Relay Test)["Enter Service Mode.","Press the down arrow repeatedly (right ATM key) until {TEST} is…
  • Version Mode["Enter Service Mode.","Press the down arrow repeatedly (right ATM key) until {VERSION} is…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass