Amana VBC-18CT-1J/P54878-1C

Available documentation

Error codes (33)

Service modes (40)

• 24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
• 24 Hour Clock Toggle (H1/M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
• 24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
• 24-Hour Clock Toggle["Press and hold CANCEL and DELAY pads for 3 to 5 seconds."]
• Actuator and Switch Test["Set TEMP SELECT switch to Hot/Cold (HC).","Unplug the washer power cord from the household outlet…
• Automatic Operations Test["Set TEMP SELECT switch to Cold/Cold (CC).","Unplug the washer power cord from the household…
• Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
• Child Lock Out (H1/M1/M2 Control)["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' will display where temperature…
• Clock Display TogglePress and hold Cancel and Clock pads for 3 seconds.
• Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
• Control Reset1
• Demo Mode1
• Diagnostic Code DisplayPress and hold the More + pad for 3 to 5 seconds within 30 seconds of powering up the control.
• Diagnostic Code Display Mode["Press and hold UP ARROW pad and apply power to the unit.","Cycle through the codes using the…
• Diagnostic Code Display Mode (H1 Control)Press and hold the AUTOSET pad for 3 seconds at power-up
• Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad while powering up the unit
• Diagnostic Code Display Mode (M1/M2 Control)Press and hold the Up Arrow pad and power up the unit
• Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad while powering up the unit
• Display Test1
• Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
• Faults Access1
• Interface Test["Set TEMP SELECT switch to Warm/Warm (WW).","Unplug the washer power cord from the household…
• Keypad LockoutPress and hold Cancel and Timer pads for 3 to 5 seconds. Press More + or Less
• One-Watt Standby ModePress and hold Cancel and Less
• Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit-pad. 3. Immediately press and hold Bake pad for 3 to 5…
• Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
• Oven Temperature Adjustment (H1/M1/M2 Control)1
• Oven Temperature Adjustment (H1/M1/M2 Controls)1
• Quick Test1
• Quick Test Mode["Must be entered within the first 5 minutes of applying power.","Press and hold CANCEL and BROIL…
• Quick Test Mode (H1 Control)1
• Quick Test Mode (M1/M2 Control)1
• Sabbath ModeHold CLOCK pad for 3 seconds to activate Sabbath mode.
• Sabbath Mode (H1/M1/M2 Control)["Hold CLOCK pad for 3 seconds to activate Sabbath mode."]
• Service Mode1
• Software Versions Access1
• Temperature Display (°F/°C toggle)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
• Temperature Display (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
• Temperature Display Toggle (°F/°C)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds."]
• Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.