Model reference

Amana U12F/P60117-25W

Name: Amana U12F/P60117-25W
Brand: Amana

Freezer

56 error codes29 service modes

MyPros+ Max

Diagnose your Amana U12F/P60117-25W.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Amana Freezer

1c1c on my Amana U12F/P60117-25W

M+

Shorted key detected on the membrane

From Tech Sheet W10028386, p.38:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (56)

CodeMeaning

1c1cShorted key detected on the membrane keyboard.1c2cMembrane keyboard disconnected from the control board.1c4cBoard-to-board communication failure.1c6cEEPROM hardware fault.1c7cControl not calibrated.1c81EEPROM CRC error in Cook Profile data.1c8cEEPROM CRC error in User Options data.1d11Unlocked runaway oven temperature exceeding 600°F.1d21Locked runaway oven temperature exceeding 950°F.3d11Oven temperature sensor circuit is open.3d21Oven temperature sensor circuit is shorted.3d41Meat probe circuit is shorted.3d51Meat probe not calibrated.4d11Door switch not closed when door is locked.4d21No cooling fan rotation detected.4d31Cooling fan is on when it should be de-energized.4d41Cooling fan overspeed condition detected.4d51Door switch circuit fault.9d11Door latch will not lock.9d21Door latch will not unlock.9d31Door latch reports both locked and unlocked simultaneously.F01Oven temperature sensor opened.F02Welded element relays.F03Appliance Manager EEPROM error.F04Appliance Manager F05Door or Latch Problems.F06Appliance Manager Malfunction.F07Encoder Failure.F08Cancel Button Disconnected.F0E0No error(s) found (Good)

View all 56 error codes

F1E0Internal failure F1E1Internal failure F1E4Microwave ACU PCBA failure.F20Water Temperature Out of Range.F21Water Level Sensor Error.F23Boil Over Temperature.F24Drain Button Disconnected.F25Boiler Failure.F2E0Keypad disconnected.F2E1Stuck key / shorted key.F3E0Upper oven sensor shorted or open.F3E1Lower oven sensor shorted or open.F3E2Warming drawer sensor shorted or open (oven not equipped with this feature).F3E3Meat probe shorted.F4E1Cavity temperature sensor failure.F4E4Humidity sensor error.F4E9Smart pop error.F5E0Door and latch switch do not agree.F5E1Door latch not operating.F6E0Lost communication between user interface and appliance manager.F6E1Cook oven over temperature.F6E2Clean oven over temperature.F6E3No cavity size command.F6E4User interface / appliance manager mismatch.F6E5Mini oven / warm drawer over temperature (oven not equipped with this feature).F8E5Exhaust air template detection failure (HF NTC thermistor issue).

Service modes (29)

Auto Boiler Test (Select Steam position)["1
Boil Dry Test["1. Drain the reservoir completely. Do not stop draining operation until no water exits from the…
Cavity Size Programming["Unplug oven or disconnect power.","Wait 10 seconds, then plug in oven or reconnect power.","Enter…
Clear Last Error Code["Unplug oven or disconnect power.","Wait 10 seconds, reconnect or plug in oven.","Enter…
Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
Control Reset1
control_lockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
control_reset1
Demo Mode1
Diagnostics Mode["Press the OFF key to place the oven in an idle state.","Press OFF, OFF, START."]
Diagnostics Mode / Test Mode["Plug in microwave oven or reconnect power.","Press CANCEL button to reach standby (colon…
Display Test1
display_test1
Fahrenheit to Celsius Conversion["Press OPTIONS and then '1' to toggle temperature between Fahrenheit and Celsius settings."]
Faults Access1
faults_access1
Oven Temperature Calibration Adjustment["Press OPTIONS and then '6' to set the calibration.","On double ovens only, press UPPER OVEN or…
Programming the Cavity Size["Unplug oven or disconnect power.","Wait 10 seconds, then plug in oven or reconnect power.","Enter…
Quick Test Mode (EOC III)1
quick_test1
Sabbath Mode Exit["Press OPTIONS and '7' to end Sabbath mode."]
Service Mode1
Service Test / Component Test["1
service_mode1
Software Versions Access1
software_versions_access1
Steam Failure Reset["1
Temperature Calibration Adjustment["Press OPTIONS and then '6' to set the calibration.","On double ovens only, press UPPER OVEN or…
Temperature Unit Toggle (Fahrenheit/Celsius)["Press OPTIONS and then '1' to toggle temperature between Fahrenheit and Celsius settings."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana freezer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass