Model reference
Amana AGDS902
Range
4 documents8 error codes5 service modes
Available documentation
Service Manual
- Specification Sheet3 pg
- Service Manual for Amana® Service Gas Self-Clean Downdraft Ranges62 pg
- Service Manual for Amana® Gas Self-Clean Downdraft Ranges62 pg
Bulletin
- Safety Notice1 pg
MyPros+ Max
Diagnose your Amana AGDS902.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (8)
CodeMeaning
F1Indicates a failed component in the ERC (Electronic Range Control).F2Sensor resistance too high.F3Open wire lead in sensor harness, failed harness/sensor connection, or sensor…F4Sensor resistance too low (below 500 ohms).F5Indicates a failed component in the ERC.F6Indicates a failed component in the ERC or due to fluctuations in 60 Hz power…F7Indicates a shorted or sticking contact in one or more of the function control…F8Indicates a failed component in the ERC.Service modes (5)
- Display Mode (Sales Demonstration)["Clock must previously be set to time of day.","Press and hold the 'clock' button until 'time' is…
- Display Mode / Sales Demonstration Mode1
- ERC Temperature Calibration1
- Oven Temperature Adjustment (Consumer)["Push BAKE pad.","Turn TIME/TEMP SET knob until an oven temperature greater than 500°F shows in…
- Touch Tone Deletion/RestoreDepress and hold the CANCEL push pad for 5 seconds to toggle touch tone beep on or off.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass