Amana 85278-P1109010W

Available documentation

Error codes (5)

Service modes (13)

• Access Mode (via Palm handheld)["Use Service Routine software on Palm handheld.","Hold the handheld at a 90° angle no more than…
• Access Mode (via rocker switch)["Remove access door on top of meter case (may be locked and require a key).","Push and release the…
• Console Diagnostics (within Diagnostic Test Mode)["Enter the Diagnostic Test Mode as described above.","Press each button to verify it causes a beep…
• Diagnostic Test Mode["Ensure dryer is in Standby Mode (plugged in and all indicators off).","Press the following button…
• Door Switch Diagnostic (within Diagnostic Test Mode)["Enter the Diagnostic Test Mode.","Open the door
• Dryness Level Adjust (TEST #4a)["Activate the Diagnostic Test Mode (MORE TIME → LESS TIME → MORE TIME → LESS TIME within 5…
• LED Test Routine["Perform all steps under ACCESS MODE.","Push and release keypad position 5 (OFF).","All LEDs light…
• Manual Out of Service (OFF)["Perform all steps under ACCESS MODE.","Push and release keypad position 5 (OFF)
• Moisture Sensor Diagnostic (within Diagnostic Test Mode)["Enter the Diagnostic Test Mode.","Locate two metal strips on the face of the lint screen…
• Owner Settings["Perform all steps under ACCESS MODE.","Push and release keypad position 1 (HIGH).","Keypads are…
• Read Life Time Cycle Count["Perform all steps under ACCESS MODE.","Life Time Cycle Count is displayed for about one minute…
• Running Machine Without Payment Device["Perform all steps under ACCESS MODE.","Push and release keypad position 3 (LOW).","Dryer is now…
• Service Routine["Perform all steps under ACCESS MODE.","Push and release keypad position 2 (MEDIUM).","MEDIUM LED…

Full entry steps, exit procedures, and test sequences are available in Max.