mypros+
Model reference

Amana ESRFC-14D

Refrigerator

1 document52 error codes29 service modes

Available documentation

Service Manual

  • Service Manual - R020761446 pg
    Covers this model
MyPros+ Max

Diagnose your Amana ESRFC-14D.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (52)

CodeMeaning
1c1cShorted key detected on the control circuit board keyboard.1c2cKeyboard tail disconnected or keyboard loop has improper value.1c31Cancel key circuit problem (cancel key improper value) on upper/single oven…1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1d11Runaway temperature (650°F) detected with door unlocked on upper/single oven…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway temperature (950°F) detected with door locked on upper/single oven…1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Temperature sensor failure (open) on upper/single oven cavity3d12Temperature sensor failure (open) on lower oven cavity3d21Temperature sensor failure (short) on upper/single oven cavity3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure4d52Door switch circuit failure9d11Door latch will not lock on upper/single oven cavity
View all 52 error codes
9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock on upper/single oven cavity9d22Door latch will not unlock on lower oven cavity9d31Door latch both locked and unlocked simultaneously on upper/single oven9d32Door latch both locked and unlocked simultaneously on lower ovenF1 E1ACU (Appliance Control Unit) Fault.F1 E4UIC (User Interface Control) Fault.F1 E7Voltage Input Fault.F2 E1Dryer keypad is sensed pressed for 10 seconds (stuck key error); fault will…F5 E1Dryer Door Circuit Error.F6 E1Communication Failure Between ACU and UICFC E1Model/Serial number not programmed on the control.FC E2Model/Serial number not matching between ACU and UIC.FC E3Wi-Fi Connection Fault.FC E4USB FaultFC E5Software Update FailureFC E6Model Setup Export FailureFC E7Model Setup Import FailureFC E8Wi-Fi Module not responding or not connected.FP E1Coin 1 Circuit Error.FP E2Coin 2 Circuit Error.FP E3Card Reader Communication error.

Service modes (29)

  • 24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 seconds
  • Child Lockout (Control Lock)Press and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
  • Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
  • Diagnostic Code Display Mode1
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Diagnostic Mode["Enter setup mode first.","Navigate to any of the set-up codes 1 through 6 (or while dAS displays…
  • Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
  • Faults Access (EOC III Controls)1
  • Help Mode["Enter setup mode first.","Navigate to special pricing option step 2.XX (or while dAS displays if…
  • Model/Serial Number Menu["Enter Help Mode first.","While on the S0 screen, press the HEAVY DUTY keypad.","Use NORMAL keypad…
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment (Hidden Function)1
  • Quick Test Mode1. Press and hold CANCEL and BROIL pads for 3 seconds. 2. Once the control has entered Quick Test…
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode.
  • Service Mode (EOC III Controls)1
  • Setup Mode["PD Models
  • Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
  • Test Mode (UH Controls)1
  • USB Menu["Enter Help Mode first.","While on the USB screen, press the HEAVY DUTY keypad.","Use NORMAL…
  • Wi-Fi Menu["Enter setup mode and navigate to the F0 screen.","Press the HEAVY DUTY keypad to enter Wi-Fi…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana refrigerator models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax