Amana SBDE21VPE

Available documentation

Error codes (5)

Service modes (31)

• 2001 K Model Counter Depth SxS (KSBP25/KSBS25/KSCS25/KSFS25) - Diagnostics Mode["Ensure control is turned on and in normal cooling mode","Press and hold the Water Filter Reset…
• ADC 12566102 (SxS) / 12566101 (Bottom Mounts) - Forced Defrost["Toggle freezer door light switch 5 times within 6 seconds"]
• Amana 48 inch Built-in SxS - Electronic Testing Forced Compressor Start["Press Display On pad to activate control panel","Simultaneously press and hold Max Frz and…
• Amana 48 inch Built-in SxS - Electronic Testing Forced Defrost["Press Display On pad to activate control panel","Simultaneously press and hold Max Ref and…
• Amana 48 inch Built-in SxS - Program Mode["Open refrigerator door","Press Display On pad","Press * pad","Press the following sequence within…
• Amana 84 inch Bottom Mount - Program Mode["Open refrigerator door","Press Display On pad","Press * pad","Press the following sequence within…
• Amana Top Mount (Frigidaire-built) - System Diagnostics Forced Defrost["Press the refrigerator light switch five times in a six second time period"]
• Amana/Galesburg Platform After April/June 2003 (12002104) - Forced Defrost["Cycle cold control on and off three times in six seconds","Leave cold control in closed (call for…
• Forced Compressor Start (Electronic Testing Mode)["Press * pad to activate control panel.","Simultaneously press and hold Fast Freeze pad and…
• Forced Defrost (Program Mode B)["Enter Program Mode B.","Press and hold Alarm Off pad for 3 seconds."]
• Forced Defrost Start["Press * pad to activate control panel.","Simultaneously press and hold Max Cool and Display Off…
• Forced Pulldown / Compressor Start (Program Mode B)["Enter Program Mode B.","Press and hold Fast Freeze pad for 3 seconds."]
• Galesburg Platform Before May 2003 (61005988) - Forced Defrost["Jump L1 to Test terminal on ADC board"]
• Jazz Control - Forced Defrost Mode["Hold the refrigerator door light switch closed","Press the Refrigerator Temperature Down keypad 3…
• Jazz Control - Programming Mode["Open the Fresh Food door","Hold the Fresh Food door light switch closed","Press the Freezer…
• Jazz Control - Service Test Mode["Hold the refrigerator door light switch closed","Press the Refrigerator Temperature Up keypad 3…
• Jenn-Air Luxury Series - Diagnostic Control Mode["With fresh food door open and fresh food door switch in closed position","Press Power Interrupt 3…
• Legacy Amana/Maytag/Jenn-Air - Forced Defrost["Compressor must be running and one compartment door closed","Press either door light switch 4…
• Model GAFZ21XXMK00 - ADC Test Method #1["Turn the thermostat off for 15 seconds","Turn the thermostat on for 5 seconds","Turn the…
• Model GAFZ21XXMK00 - ADC Test Method #2["Disconnect the refrigerator/freezer from the wall outlet for at least 30 seconds","Turn the…
• Program Mode A (Thermistor Temperature Reading)["Open refrigerator door.","Press * pad.","Press Vacation pad.","Press the following sequence of…
• Program Mode B (Programming Functions)["Enter Program Mode A first (open refrigerator door, press *, press Vacation, then press Max Cool…
• Utah Control - Forced Defrost Mode["Press and hold the Door Alarm key (first) and Temperature Down keypad","Release the Door Alarm…
• Utah Control - Programming Mode["Press and hold Door Alarm key","Press Freezer Temperature Down key","PE will appear in the…
• Utah Control - Service Mode["Press and hold Door Alarm key (first) and Refrigerator UP keypad","Release the Door Alarm keypad…
• V Series SxS - Electronic Testing Mode - Forced Compressor Start["Press * pad to activate control panel","Simultaneously press and hold Fast Freeze and Display Off…
• V Series SxS - Electronic Testing Mode - Forced Defrost Start["Press * pad to activate control panel","Simultaneously press and hold Max Cool and Display Off…
• V Series SxS - Program Mode A (Thermistor Temperatures)["Open refrigerator door","Press * pad","Press Vacation pad","Press the following sequence within 6…
• V Series SxS - Program Mode B (Electronic Testing)["Enter Program Mode A first","Press * pad to toggle to Program Mode B","Clean condenser indicator…
• Whirlpool ADC Test Method #1 - Forced Defrost["Turn thermostat off for 15 seconds","Turn thermostat on for 5 seconds","Turn thermostat off for…
• Whirlpool ADC Test Method #2 - Forced Defrost["Unplug unit from wall outlet for 30 seconds","Turn thermostat off","Plug in unit"]

Full entry steps, exit procedures, and test sequences are available in Max.