mypros+
Model reference

Amana SR25W-P60340-15W

Refrigerator

4 documents28 error codes19 service modes

Available documentation

Tech Sheet

  • Tech Sheet - 975920812 pg
    Covers this model
  • Tech Sheet - 160217244 pg
    Covers this model

Wiring Diagram

  • KitchenAid KBFN506ESS01 Refrigerator Wiring Sheet4 pg
    Covers this model

Installation Guide

  • Installation Instructions24 pg
    Covers this model
MyPros+ Max

Diagnose your Amana SR25W-P60340-15W.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Service modes (19)

  • Bake Temperature Offset Adjustment1
  • Fahrenheit to Celsius ConversionPress the BROIL pad for 5 seconds
  • Force/Terminate DefrostToggle freezer door light switch 5 times within 6 seconds.
  • Programming Cavity Size (Self-Clean models)Within 60 seconds of power up, press the following touchpads in sequence
  • Programming Cavity Size (Standard-Clean models)Within 60 seconds of power up, press the following touchpads in sequence
  • Programming the Cavity SizeWithin 60 seconds of power up, press the following touchpads in order
  • Service Mode (Mode A – System Checks and Mode B – Calibration)1
  • Service Mode A - Option 1: Display Error CodesWhile in Service Mode A, press the Confirm Settings Key to enter this option.
  • Service Mode A - Option 10: Display Door Opening CountWhile in Service Mode A, navigate to Option 10 and press the Confirm Settings Key.
  • Service Mode A - Option 11: Display Defrost Terminator StatusWhile in Service Mode A, navigate to Option 11 and press the Confirm Settings Key.
  • Service Mode A - Option 2: Display Average On and Off TimesWhile in Service Mode A, navigate to Option 2 and press the Confirm Settings Key.
  • Service Mode A - Option 3: Forced Pull-downWhile in Service Mode A, navigate to Option 3 and press the Confirm Settings Key.
  • Service Mode A - Option 4: Independent Evaporator Fan ModeWhile in Service Mode A, navigate to Option 4 and press the Confirm Settings Key.
  • Service Mode A - Option 5: Display Current Actual TemperaturesWhile in Service Mode A, navigate to Option 5 and press the Confirm Settings Key.
  • Service Mode A - Option 6: Force Compressor On OnlyWhile in Service Mode A, navigate to Option 6 and press the Confirm Settings Key.
  • Service Mode A - Option 7: Force Condenser Fan On OnlyWhile in Service Mode A, navigate to Option 7 and press the Confirm Settings Key.
  • Service Mode A - Option 8: Force Evaporator Fan On OnlyWhile in Service Mode A, navigate to Option 8 and press the Confirm Settings Key.
  • Service Mode A - Option 9: Force Motorized Damper On OnlyWhile in Service Mode A, navigate to Option 9 and press the Confirm Settings Key.
  • Verify Cavity Size ProgrammingPress and hold CANCEL pad for 5 seconds, then press and hold START pad for 5 seconds. The first…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass