Daewoo CDC1574

Available documentation

Service modes (12)

• A/S ROM Booting (Emergency Browser Download)["Turn off the set-top box","Press and hold the A/S button (S002)","While holding A/S button, turn…
• EEPROM Clear (Standby mode)In Standby mode, press LEFT (VOLUME DOWN), (PR) UP and AV key on the TV set at the same time.
• Factory Mode - Heat-run & Test Pattern (Digit 1)Enter Service Mode, then press Digit 1 key. Pressing cycles through
• Factory Mode - Outgoing (Digit 6)Enter Service Mode, then press Digit 6 key
• Factory Mode - Picture Control Checking (Digit 2)Enter Service Mode, then press Digit 2 key. Picture control values change automatically
• Factory Mode - Sound Control Checking (Digit 3)Enter Service Mode, then press Digit 3 key. Sound control values change automatically
• reset1
• Service ModePress Digit 1 key → Mute key → Status key → Mute key in sequence within 5 seconds.
• Service Mode (via Service Remocon)Use dedicated Service Remocon
• Service Mode (via User Remocon)1) Press the 1 key
• service_mode1
• video_control_data_mode1

Full entry steps, exit procedures, and test sequences are available in Max.