mypros+
Model reference

Gaggenau KI03

Oven

1 document19 error codes3 service modes

Available documentation

Service Manual

  • Changes to ED 220/221 KI 02/0332 pg
    Covers this model
MyPros+ Max

Diagnose your Gaggenau KI03.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (19)

CodeMeaning
F 10Cooking compartment sensor PT 1000 interruption.F 11Cooking compartment sensor PT 1000 short-circuit.F 12Core temperature sensor PT 1000 interruption.F 13Core temperature sensor PT 1000 short-circuit.F 14NTC housing sensor / relay electronics interruption.F 15NTC housing sensor / relay electronics short-circuit.F 20Humidity selector ribbon cable contact fault or switch defective.F 21Temperature selector ribbon cable contact fault or switch defective.F 23Relay control ribbon cable contact fault or control unit defective.F 30Control electronics EEPROM defective / not readable or writable.F 41Humidity selector or temperature selector short-circuited to protective earth…F 61Heat output too low or too much water in the cooking compartment.F 62Heat output too high or too little water in the cooking compartment; metering…F 63Too little water in the cooking compartment / appliance does not cool down.F 70Water sensor detects water in base pan; valves or hoses leaking.F 71Waste-water tank is not emptied within 1 min; float switch is sticking /…F 72Water sensor defective; replace relay control.F 73N-relay (REL 11) defective (sticking); all-pole disconnection failure.F 74Pressure release not possible; metering valve blocked / steam metering valve…

Service modes (3)

  • Demonstration circuit activation1
  • Parameter input mode (within Service programme, test step 08)1
  • Service programme (Diagnostic/Test mode)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Gaggenau oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass