Model reference

GE GDT695SSJ2SS

Name: GE GDT695SSJ2SS
Brand: GE

Dishwasher

2 documents1 error code5 service modes

Available documentation

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·GE Dishwasher

LEAK DETECTED on my GE GDT695SSJ2SS

M+

The dishwasher's leak detection system

From Service Manual 235227, p.39:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure drain pump winding resistance at connector J7. Expected: 12 to 16 ohms at room temperature.

3.Verify the board switches the pump at 120 VAC during the drain cycle.

Part WD19X23874

Drain pump assembly

CodeMeaning

Control LockDepending on model, press and hold the 1 or 2 buttons indicated on the controls for 3 seconds…
End-of-Cycle Beep TogglePress the Heated Dry button 5 times within 3 seconds.
Low Rinse Aid Indicator TogglePress the Pre-Soak or Steam button 7 times within 5 seconds to turn the Low Rinse Aid indicator off.
Mute All SoundsPress the Heated Dry or Power Dry button 7 times within 5 seconds.
Sabbath / Door Wake Up ModePress and hold Start and Wash Temp buttons for 5 seconds, close the door, and wait 3 minutes for…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass