Model reference

GE PDW9700N20II

Name: GE PDW9700N20II
Brand: GE

Dishwasher

3 documents2 error codes10 service modes

Available documentation

GE Profile Dishwasher Technical Service Guide37 pg
Covers this model
GE Consumer & Industrial Technical Service Guide - GE Profile Dishwasher PDW8900 Series, PDW9700 Series, PDW9900 Series37 pg
Covers this model
GE Profile TM Dishwasher Technical Service Guide37 pg
Covers this model

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·GE Dishwasher

Lock LED + continuous beep on my GE PDW9700N20II

M+

Factory Test Mode calibration failure:

From Service Manual 883491, p.23:

1.Access service mode to confirm the active fault code and read stored error history.

2.Disconnect the sensor and measure resistance. Expected: 10 kΩ to 12 kΩ at 77°F (25°C).

3.Check the sensor harness for opens. A reading outside 5 kΩ to 50 kΩ indicates a failed sensor.

Part WR55X10025

Temperature sensor

CodeMeaning

Consumer Purge Cycle1. Make sure Pre-wash, Added Heat, and Heated Dry LEDs are off. 2. Press Heated Dry and Cookware…
Demo ModePress the Cookware pad (Down arrow on Top Control models) and Added Heat pad simultaneously for 5…
Factory Test Mode1
Service ModePDW8900 Series
Turbidity Sensor CalibrationMust be entered within 2 minutes of power up
Water Hardness Calibration ModePDW8900
Water Hardness Calibration Mode - Front Mount Control (PDW8900)["Dishwasher must be in standby mode
Water Hardness Calibration Mode - Top Mount Control (PDW9700, PDW9900)["Dishwasher must be in standby mode.","Press up arrow to wake up control and illuminate the lights…
Water Hardness Calibration Mode (PDW8900)Dishwasher must be in standby mode
Water Hardness Calibration Mode (PDW9700/PDW9900)Dishwasher must be in standby mode

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass