Model reference

GE GTD86ESSJWS

Name: GE GTD86ESSJWS
Brand: GE

Dryer

1 document11 error codes14 service modes

Available documentation

GE CleanSpeak™ Wi-Fi Connect Dryers Technical Service Guide57 pg
Covers this model

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·GE Dryer

F01 on my GE GTD86ESSJWS

M+

Inlet thermistor short circuit.

From Service Manual 858380, p.32:

1.Access service mode to confirm the active fault code and read stored error history.

2.Disconnect the sensor and measure resistance. Expected: 10 kΩ to 12 kΩ at 77°F (25°C).

3.Check the sensor harness for opens. A reading outside 5 kΩ to 50 kΩ indicates a failed sensor.

Part WR55X10025

Temperature sensor

CodeMeaning

Service Test ModeFrom an idle state, simultaneously press and hold the START button and rotate the cycle select knob…
t1 - Dryer ModelNavigate to t1 in service test mode and press START.
t2 - Software VersionNavigate to t2 in service test mode and press START.
t3 - XML CheckNavigate to t3 in service test mode and press START to scroll the memory version.
t4 - User Interface TestNavigate to t4 in service test mode and press START.
t5 - Fault CodesNavigate to t5 in service test mode and press START.
t6 - Outlet ThermistorNavigate to t6 in service test mode and press START.
t7 - Inlet ThermistorNavigate to t7 in service test mode and press START.
t8 - Moisture SensorNavigate to t8 in service test mode and press START.
t9 - Door Open/Door ClosedNavigate to t9 in service test mode and press START.
ta - CleanSpeak TestNavigate to ta in service test mode.
tb - Water Valve TestNavigate to tb in service test mode and press START.
tc - Restores EEPROMNavigate to tc in service test mode and press START.
td - Set ModelNavigate to td in service test mode and press START

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass