mypros+
Model reference

GE PSS26PSWASS

Refrigerator

5 documents16 service modes

Available documentation

Service Manual

  • GE Profile Side-By-Side Refrigerators Technical Service Guide66 pg
    Covers this model
  • GE Consumer & Industrial Technical Service Guide - Profile Side-By-Side Refrigerators66 pg
    Covers this model
  • Profile Side-By-Side Refrigerators Technical Service Guide66 pg
    Covers this model
  • Technical Service Guide - Profile Side-By-Side Refrigerators66 pg
    Covers this model

Service Flash

  • Express Thaw LED lights up on its own GE Ref pss26n psi23s2 pg
    Covers this model
MyPros+ Max

Diagnose your GE PSS26PSWASS.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Service modes (16)

  • Demo ModePress the HOME and HELP pads simultaneously for 3 seconds.
  • Diagnostic Aid - 100% Run TimeWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=2, then press any…
  • Diagnostic Aid - Control and Sensor System TestWhile in diagnostic aid test mode, enter Freezer Display=0, Fresh Food Display=7, then press any…
  • Diagnostic Aid - Dampers TestWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=0, then press any…
  • Diagnostic Aid - Defrost TestWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=4, then press any…
  • Diagnostic Aid - Fan TestWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=1, then press any…
  • Diagnostic Aid - Main Control Reset/Test ExitWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=5, then press any…
  • Diagnostic Aid - Prechill TestWhile in diagnostic aid test mode, enter Freezer Display=1, Fresh Food Display=3, then press any…
  • Diagnostic Aid Kit Mode1
  • Factory Test - All FansEnter Self Diagnosis Mode (press HOME, CRUSHED, WATER simultaneously), then press FACTORY TEST…
  • Factory Test - CalibrateEnter Self Diagnosis Mode (press HOME, CRUSHED, WATER simultaneously), then press FACTORY TEST…
  • Factory Test - Scan ScreenEnter Self Diagnosis Mode (press HOME, CRUSHED, WATER simultaneously), then press FACTORY TEST…
  • HMI TestEnter Self Diagnosis Mode (press HOME, CRUSHED, WATER simultaneously), then press HMI TEST.
  • Icemaker Service Test Mode1
  • Self Diagnosis Mode (LCD Screen)Press and hold the HOME, CRUSHED, and WATER pads simultaneously
  • Self-Diagnosis Mode (LCD Screen)Press and hold the HOME, CRUSHED, and WATER pads simultaneously

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass