mypros+
Model reference

GE ZICS360NNHLH

Refrigerator

11 documents15 service modes

Available documentation

Tech Sheet

  • Technical Data - MONOGRAM Refrigerator2 pg
    Covers this model

Service Manual

  • TECHNICAL SERVICE GUIDE - Monogram Bottom Mount Inverter Compressor Refrigerators with Electronic Controls51 pg
    Covers this model
  • TECHNICAL SERVICE GUIDE Monogram Bottom Mount Inverter Compressor Refrigerators with Electronic Controls51 pg
    Covers this model

Bulletin

  • Fresh Food Motorized Damper1 pg
    Covers this model
  • Service Bulletin - Mullion Condensation WR49X10081 Installation Instructions2 pg
    Covers this model
  • Service Bulletin - Refrigerators REF 04-04 Energy Models Icemaker Fill Tube Freeze Repair4 pg
    Covers this model
  • Eliminate "Bubbling" Sound1 pg
    Covers this model
  • Icemaker Fill Tube Freeze Repair4 pg
    Covers this model
  • Service Bulletin - Refrigerator Mullion Condensation2 pg
    Covers this model

Training

  • Diagnostic Modes Manual for GE Refrigerators248 pg
    Covers this model
  • Appliance Diagnostic Modes - Refrigerator37 pg
    Covers this model
MyPros+ Max

Diagnose your GE ZICS360NNHLH.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Service modes (15)

  • 100_percent_run_timeIn diagnostic mode, set freezer display to '1' and fresh food display to '2', then press any pad…
  • communication_check_dispenser_to_main_boardIn diagnostic mode, set freezer display to '0' and fresh food display to '4', then press any pad…
  • communication_check_temp_control_to_dispenserIn diagnostic mode, set freezer display to '0' and fresh food display to '3', then press any pad…
  • communication_check_temp_control_to_main_boardIn diagnostic mode, set freezer display to '0' and fresh food display to '2', then press any pad…
  • control_and_sensor_system_self_testIn diagnostic mode, set freezer display to '0' and fresh food display to '7', then press any pad…
  • dampers_testIn diagnostic mode, set freezer display to '1' and fresh food display to '0', then press any pad…
  • defrost_testIn diagnostic mode, set freezer display to '1' and fresh food display to '4', then press any pad…
  • degree_c_f_toggleIn diagnostic mode, set freezer display to '1' and fresh food display to '7', then press any pad…
  • diagnosticPress both the freezer temperature pads (plus and minus) and the refrigerator temperature pads…
  • dispenser_recess_heater_testIn diagnostic mode, set freezer display to '0' and fresh food display to '9', then press any pad…
  • hmi_self_testIn diagnostic mode, set freezer display to '0' and fresh food display to '6', then press any pad…
  • main_control_resetIn diagnostic mode, set freezer display to '1' and fresh food display to '5', then press any pad…
  • open_duct_door_testIn diagnostic mode, set freezer display to '0' and fresh food display to '8', then press any pad…
  • pre_chill_testIn diagnostic mode, set freezer display to '1' and fresh food display to '3', then press any pad…
  • showroom_modeIn diagnostic mode, set freezer display to '0' and fresh food display to '1', then press any pad…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass