Model reference
Haier HLP22P
Washer
2 documents9 error codes4 service modes
Available documentation
Service Manual
- User Manual HLP22P84 pg
- Haier Portable Washer HLP22P Service Manual30 pg
MyPros+ Max
Diagnose your Haier HLP22P.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (9)
CodeMeaning
E0Washer door was not shut properly during the delay start mode.E1Draining is too slow; the hose could be blocked, cut, or not properly set.E2The washer has stopped running during the Wash/Spin/Rinse mode because the…E3The washtub is not spinning due to the washer not being leveled properly or an…E4Incoming water flow is very slow due to improper opening of the faucet, a…E5Incoming hot water temperature exceeds 122°F/50°C.E6Water sensor is defective; the washer needs servicing.E8The power voltage is too low.E9The power voltage is too high.Service modes (4)
- Buzzer Test (C1)["Enter Test Program mode (hold RESERVE + PROGRAM, press POWER ON/OFF).","C1 is displayed by default
- Spin Test (C3)["Enter Test Program mode and press RESERVE button to switch to C3.","The remain time digitron…
- Test Program (No-Water Test)["Under standby mode, push and hold the RESERVE and PROGRAM buttons simultaneously.","While holding…
- Wash Test (C2)["Enter Test Program mode and press RESERVE button to switch to C2.","The remain time digitron…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Haier washer models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass