Model reference

Haier XQB42-66

Name: Haier XQB42-66
Brand: Haier

Washer

1 document1 error code3 service modes

Available documentation

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Haier Washer

E1 on my Haier XQB42-66

M+

Drain failure: the machine does not

From Service Manual 838711, p.43:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure drain pump winding resistance at connector J7. Expected: 12 to 16 ohms at room temperature.

3.Verify the board switches the pump at 120 VAC during the drain cycle.

Part WD19X23874

Drain pump assembly

CodeMeaning

Test A - Buzzer and indicator testPush and hold the 'Procedure Selection' and 'Jeans' buttons simultaneously, then push down the…
Test B - Wash motor test (no water)Enter Test A mode first (hold 'Procedure Selection' and 'Jeans', then push power switch)
Test C - Spin test (no water)Enter Test A mode first (hold 'Procedure Selection' and 'Jeans', then push power switch)

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass