Model reference
Hotpoint WM60
Washer
2 documents11 error codes9 service modes
Available documentation
Service Manual
- Servicemanual WM6049 pg
Service Flash
- Modified front beam WM601 pg
MyPros+ Max
Diagnose your Hotpoint WM60.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (11)
CodeMeaning
F10Overflow faultF11Water outlet faultF12Water inlet faultOver flow faultToo much water in the machine, or drain pump is on without water in the machine…Pressure faultIndicated if the water level drops to 0 within 30 seconds of the first rinsing.Security faultThe door is open during operation.Temperature faultTemperature raised less than 5°C within 10 minutes; wash cycle continues to…Thermistor faultThe circuit for the thermistor is open, the thermistor is faulty, or the…Wash motor faultNo signal from tacho or MCU.Water inlet faultCorrect water level not reached within 5 minutes; wash cycle interrupted.Water outlet faultDrain pump activated more than 3 minutes with water still in the machine; wash…Service modes (9)
- Reset fault indications WM60.3/WM60.2["Press the Door Opening button at the same time as the Main Power switch."]
- Service menu WM60.1["If the machine is on, turn off the power first at the main switch.","Press and hold the…
- Service menu WM60.2["Turn off the machine using the main power switch.","Wait for at least 5 seconds.","Press and hold…
- Service menu WM60.3["If the machine is on, first switch the power off with the main power switch.","Press the program…
- Shop program WM60.3 (from week 737 on)["If the machine is on, first turn off the power at the main power switch.","Press and hold the…
- Shop program WM60.3 (up to week 736)["If the machine is on, first turn off the power at the main power switch.","Press and hold the…
- Total reset WM60.1["Turn off power (S1).","Wait for at least 5 seconds.","Hold Door Opening button (S11).","Turn on…
- Total reset WM60.2["Turn off power (S1).","Wait for at least 5 seconds.","Hold Door Opening button (S14).","Turn on…
- Total reset WM60.3["In the service menu, press S14 when power is on to total reset (return to default values of all…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Hotpoint washer models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass