Model reference

Magic Chef U82FA-1K

Cooktop

7 documents40 error codes5 service modes

Available documentation

Service Manual

30" Freestanding Self-Cleaning Electric Range72 pg
Covers this model
jobaid 4317323 kac 2860 pg
Covers this model
Technical Education Job Aid 4317323 KAC-28 Electric Built-in Single Oven60 pg
Covers this model
Service Manual - 432168957 pg
Covers this model
Job Aid - 8178042 (KR-31)72 pg
Covers this model

Tech Sheet

Wiring Diagram - W10877205 - Rev A2 pg
Covers this model

Other

8178066 (R-95)64 pg
Covers this model

MyPros+ Max

Diagnose your Magic Chef U82FA-1K.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Magic Chef Cooktop

F0 on my Magic Chef U82FA-1K

M+

Default F code — No failure. Will only

From Service Manual 547505, p.37:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (40)

CodeMeaning

F0Default F code F0 E0Factory default F1Electronic control malfunction (all E codes).F1 E0EEPROM communications error.F1 E1EEPROM checksum error.F1 E2UL A/D error(s).F1 E4Model ID error.F1 E6Latch signal mismatch error.F1-E0Key held down too long, or key is shorted.F1-E1Keypad keytail not connected.F1-E5Cancel key drive line open.F2Electronic control malfunction.F2 E0Key held down too long, or key is shorted.F2 E1Keypad keytail not connected.F2 E5Cancel key drive line open.F3 E0Temperature sensor opened.F3 E1Temperature sensor shorted.F3 E2Oven temperature too high (over 301°C / 575°F in Cook mode).F3 E3Oven temperature too high (over 510°C / 950°F in Clean mode).F3 E4Oven sensor opened F3 E5Oven sensor shorted F3 E6Warming drawer sensor open.F3 E7Warming drawer sensor shorted.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Oven temp too high (over 301°C [575°F] in Cook mode).F3-E3Oven temp too high (over 510°C [950°F] in Clean mode).F4 E1Meat probe malfunction F4-E1Meat probe malfunction F5 E0Door is open but latch is locked (door switch closed indicating open door, and…

View all 40 error codes

F5 E1Self-clean latch will not lock.F5 E5Self-clean temperature (288°C / 550°F) not reached within 45 minutes.F5 E7Self-clean latch will not unlock.F5-E0Door is open, but latch is locked (door switch closed indicating open door, and…F5-E1Self clean latch will not lock.F5-E5Self clean temperature (288°C [550°F]) not reached within 45 minutes.F5-E7Self clean latch will not unlock.F6 E0Return line not connected; electronic control will display F6 within 60 seconds…F6-E0Return line not connected.F8 E0Not specified (listed as N/A).

Service modes (5)

Fahrenheit to Celsius conversionPress the BROIL pad for 5 seconds
Fault code history recallPress and hold the '0' touchpad for 5 seconds to access the previous fault codes
Programming Cavity SizeWithin 60 seconds of power up, press
Programming the cavity sizeWithin 60 seconds of power up, press the following touchpads in order
Sabbath Mode exitIf 'SAB' appears in the display, press and hold the '6' touchpad for 5 seconds to end Sabbath Mode.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Magic Chef cooktop models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass