Magic Chef 11JY-10K

Available documentation

Error codes (20)

Service modes (23)

• Control Panel Deactivation (RCS10MP P1140412M / RCS10MPS P1324901M)["Open oven door, and close oven door.","Press TIME ENTRY pad.","Press 1, 3, 5, and 7 pad in…
• customer_focused_drying_mode_adjustment["Press and hold the Dryness button for 5 seconds.","Dryer beeps and displays CF for one second…
• diagnostic1. Set configuration
• Diagnostic - Console switches and indicatorsWhile in Diagnostic Test Mode, press each button or turn the cycle selector to each cycle.
• Diagnostic - Door switchWhile in Diagnostic Test Mode, open and close the dryer door.
• Diagnostic - Moisture sensorWhile in Diagnostic Test Mode, locate two metal strips on the front of the lint screen housing
• Diagnostic Test Mode["Set door to open position.","Set Temperature switch to Air Only.","Set End of Cycle Signal switch…
• diagnostic_test_mode["Ensure dryer is in standby mode (plugged in with all indicators off, or with only the Clothes Dry…
• display_line_voltage["Enter diagnostic test mode.","Advance past all saved fault codes.","Press the Cycle Signal…
• Dryness level adjustment mode1
• holiday_modePress the Holiday Mode key
• Less Dry Test["Begin with a fully assembled, empty dryer with clean lint screen connected to a known good power…
• less_dry_test1. Set configuration
• manual_load_test["Ensure dryer is in standby mode (plugged in with all indicators off, or with only the Clothes Dry…
• Programming mode (RCS10 P1140411M)["Open oven door.","Press and hold pad 1 for approximately 15 seconds.","Signal sounds and display…
• Programming mode (RCS10MP P1140412M / RCS10MPS P1324901M)["Open oven door.","Press and hold pad 1 for approximately 15 seconds.","After 15 seconds, signal…
• Programming mode (RFS9B, RCS10, RCS10MP, RCS10MPS, RFS10S, RFS12MPS, RFS12S - 2000/2002 models)["Open oven door.","Press and hold pad 1 for approximately 5 seconds.","After 5 seconds, signal…
• sales_demonstrationPress and hold the Max Cool and Power On/Off keys for 2 seconds.
• Self-Diagnostic Test Mode (Touch Panel and PCBA Test)["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
• Touch Panel and PCBA Self-Diagnostic Test Mode["1
• User Options mode (RCS10MP P1140412M / RCS10MPS P1324901M)["Open oven door.","Press and hold pad 1 for approximately 15 seconds.","Press hidden…
• User Options mode (RFS10SW2, RFS12SW2)["Open oven door.","Press and hold pad 2 for approximately 5 seconds.","After 5 seconds, signal…
• User Options mode (RFS9B, RCS10, RCS10MP, RCS10MPS, RFS10S, RFS12MPS, RFS12S - 2000/2002 models)["Open oven door.","Press and hold pad 2 for approximately 5 seconds.","After 5 seconds, signal…

Full entry steps, exit procedures, and test sequences are available in Max.