Model reference
Magic Chef 31FN-8X-OC
Range
1 document23 error codes8 service modes
Available documentation
Tech Sheet
- Tech Sheet - W11726024 - Rev A2 pg
MyPros+ Max
Diagnose your Magic Chef 31FN-8X-OC.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (23)
CodeMeaning
F1E1No voltage detected at the heater relay; possible motor or heater failure or…F2E1Stuck or shorted key on the keypad.F2E2Keypad/Display disconnected from the control.F2E4HMI 1 (Human Machine Interface 1) fault.F3E0Main oven temperature sensor fault.F3E1Exhaust thermistor is open or shorted (open if temp drops below 18°F / >50k…F3E2Moisture sensor strip 1 is open or shorted (only appears in service diagnostic…F3E3Inlet thermistor is open or shorted (open if temp drops below 18°F / >245k…F3E5Second moisture sensor strip is open or shorted (Quad Sense models only; only…F5E0Main door switch and latch switch do not agree (mismatch between door and latch…F5E1Main door latch motor fault.F6E1ACU and HMI have not communicated for a specified amount of time.F6E2WiFi Module has not responded for a specified amount of time.F7E5Cooling fan error.F7E6Cooling fan blocked.FBE1Main cavity over temperature condition.FCE1WiFi Module communications lost.FCE2Model/Serial number do not match between control boards.FCE3Wi-Fi radio fault.FEE6Main cavity bake element fault.FEE7Main cavity broil element fault.FEE8Main cavity convection element fault.PFPower failure occurred while the dryer was running.Service modes (8)
- Component Activation / Quick Service Cycle (LCD in Door Models)["Enter Service Diagnostic Mode (LCD in Door) first.","From the DIAGNOSTICS HOME screen, scroll…
- Key Activation & Encoder Test (Console Models)["Activate Service Diagnostic Mode first.","Press and release the 1st button used to activate…
- Service Diagnostic Mode (Console Models)["Ensure the dryer is in standby mode (plugged in with all indicators off).","Select any three (3)…
- Service Diagnostic Mode (LCD in Door Models)["Ensure the dryer is in standby mode (plugged in with all indicators off).","Open and close the…
- Service Diagnostics Mode - Option A["Press Settings.","Navigate to Diagnostics home.","Select Service Diagnostics Code.","Enter code…
- Service Diagnostics Mode - Option B["Press Settings.","Navigate to Diagnostics home.","Select Service Diagnostics Code.","Enter any 3…
- Service Test Mode (Console Models)["Activate Service Diagnostic Mode first.","Press and release the 2nd button used to activate…
- Software Version Display (Console Models)["Activate Service Diagnostic Mode first.","Press and hold the 2nd button used to activate Service…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Magic Chef range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass