mypros+
Model reference

Magic Chef BT22LA-4T

Range

1 document63 error codes9 service modes

Available documentation

Service Manual

  • Slide-in Electric Range62 pg
    Covers this model
MyPros+ Max

Diagnose your Magic Chef BT22LA-4T.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (63)

CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected1c31Cancel key circuit problem1c32Cancel key circuit problem1c4cPower micro communication failure1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM1c82Cook profile corrupted in EEPROM1d11Runaway temperature (650°F) with door unlocked1d12Runaway temperature (650°F) with door unlocked1d21Runaway temperature (950°F) with door locked1d22Runaway temperature (950°F) with door locked3d11Temperature sensor failure (open)3d12Temperature sensor failure (open)3d21Temperature sensor failure (short)3d22Temperature sensor failure (short)3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM).4d22No Reverse Airflow Fan rotation (no/low RPM).4d31Reverse Airflow Fan state error (on when supposed to be off).4d32Reverse Airflow Fan state error (on when supposed to be off).4d41High Reverse Airflow Fan rotation (high RPM).4d42High Reverse Airflow Fan rotation (high RPM).4d51Door switch circuit failure4d52Door switch circuit failure9d11Latch will not lock
View all 63 error codes
9d12Latch will not lock9d21Latch will not unlock9d22Latch will not unlock9d31Latch both locked and unlocked9d32Latch both locked and unlockedE3The heater cannot warm the water to the desired temperature within 90 minutes…E6NTC open circuit failure (only alarmed during on-line test).E7NTC short circuit failure (only alarmed during on-line test).F1E1ACU errorF1E2Motor control errorF2E3Unsupported cycleF3E1Water level system errorF3E2Temperature system errorF3E4Mini-bulk sensor failureF4E0Heater is not detectedF5E1Door switch errorF5E2Door lock errorF5E3Door unlock errorF5E4Door not opened between cyclesF6E2Communication error ACU to UIF6E3Communication error UI to ACUF6E5Communication error between ACU and Expansion Board (EB)F7E2Motor drive circuit over temperatureF7E8Motor over temperatureF7E9Motor lock rotorF8E0Steam inlet valve errorF8E1No water detected entering washer or water level sensor trip not detectedF8E2Dispenser system errorF8E3Overflow conditionF8E4Flow meter faultF9E1Long drainrLLoad detected during the washer cleaning cycle (saved as F0E1)SudSuds detected

Service modes (9)

  • Diagnostic Code Display ModePress and hold MORE+ pad within 30 seconds of powering up the unit
  • Fault/Error Code Display["Enter Service Diagnostic Mode first.","Press and release the 3rd button used to activate Service…
  • On-Line Check Mode (Service Diagnostics Cycle)1
  • Quick Diagnostic Test["Enter Service Diagnostic Mode first.","Press and release the 2nd button used to activate Service…
  • Quick Test Mode1
  • Service Diagnostic Mode["Ensure washer is in standby mode (plugged in with all indicators off).","Wait 30 seconds after…
  • Service Mode (Keypad/LED Test)Close the door, then within 60 seconds press RINSE ONLY and START/RESUME
  • Software Version Display["Enter Service Diagnostic Mode first.","Press and hold the 2nd button used to activate Service…
  • User Interface Test["Enter Service Diagnostic Mode first.","Press and release the 1st button used to activate Service…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Magic Chef range models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax