mypros+
Model reference

Miele T982X

Dryer

1 document9 error codes3 service modes

Available documentation

Tech Sheet

  • TECHNICAL INFORMATION T 9800 and T 982x Dryers (US Models)67 pg
    Covers this model
MyPros+ Max

Diagnose your Miele T982X.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (9)

CodeMeaning
F0No fault is saved in the fault memory.F1Short circuit in heater bank NTC (2R30), corresponding to temperature above…F2Open circuit in heater bank NTC (2R30), detected below 68°F; evaluation only…F3Short circuit in drying air NTC (1R30), corresponding to temperature above…F4Open circuit in drying air NTC (1R30), corresponding to temperature below 5°F…F50Motor stalls while heater is on for 3 seconds; internal electronic fault.F55Overriding time limit exceeded; the fixed maximum drying time of approximately…F66Air leakage fault; temperature at heater bank NTC exceeds 356°F (180°C) due to…F98No gas ignition after 10 attempts (T 982x gas dryer only).

Service modes (3)

  • Demonstration Mode["End the current program.","Open the door.","Press and hold the Start/Stop button.","Close the…
  • Programming Mode["End the current program and demo mode.","Open the door.","Press and hold the Start/Stop…
  • Service Mode["End the current program and demo mode.","Open the door.","Press and hold the Start/Stop…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Miele dryer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass