mypros+
Model reference

Siemens HD2525U

Range

4 documents28 error codes5 service modes

Available documentation

Service Manual

  • Siemens Dual-Fuel Range with threeD Surround Convection® Use and Care Manual52 pg
    Covers this model
  • Technical Service Information Bosch and Siemens Free-standing and Slide-in Ranges12 pg
    Covers this model

Other

  • BoardServiceKit2 pg
    Covers this model
  • HDS7152 Fault Code Guide12 pg
    Covers this model
MyPros+ Max

Diagnose your Siemens HD2525U.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (28)

CodeMeaning
FFault code indicated by 'F' and a number appearing in the display accompanied…F1Meat probe failure detected during TEST or SERVICE mode.F111Oven runawayF113Runaway oven temperature reaching 950°F while latch is lockedF120Any key (except CANCEL) pressed longer than 60 seconds, possibly caused by…F121Touch key voltage out of limits (except CANCEL key)F122Selection mechanism for touch keys faultyF124CANCEL key pressed for more than 60 secondsF125CANCEL key voltage out of limitsF131Meat probe not calibrated when probe is in use.F132Shorted meat probeF141Slave micro not functioningF151EEPROM failure or communication circuit failureF153User interface too hotF154Power board too hotF155Cook profile corrupted in EPROM.F160Cooling fan Hall effect feedback not present (SIRF190Power over voltage at power-upF2Oven sensor failure detected during TEST or SERVICE mode.F200Time-out and stop function during production TEST modeF210Range exceeded safe test limits during SERVICE modeF3Warming drawer sensor failure detected during TEST or SERVICE mode.F31Oven temperature sensor failureF32Oven sensor shortedF33Warming drawer sensor failureF34Warming drawer sensor shortedF41Motorized latch will not lock at start of self-clean, or door light switch…F43Motorized latch will not unlock at completion of self-clean.

Service modes (5)

  • Demo Mode["Access SELECT FUNCTIONS Menu (press and hold COOKING MODE for 5 seconds).","Turn knob clockwise…
  • Lock / Unlock Oven Control Panel["Access SELECT FUNCTIONS Menu (press and hold COOKING MODE for 5 seconds).","Turn knob clockwise…
  • Select Functions Menu["Press and hold COOKING MODE pad for five (5) seconds.","SELECT FUNCTION is displayed.","Turn knob…
  • SERVICE modeNot specified in document
  • TEST modeNot specified in document

Full entry steps, exit procedures, and test sequences are available in Max.

Related Siemens range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass