Model reference

Viking VDSC548

Oven

6 documents28 error codes

Available documentation

Service Manual

Service Manual - 30, 36, & 48 Inch Dual Fuel Range53 pg
Covers this model
Service Manual 30, 36, & 48 Inch Dual Fuel Range53 pg
Covers this model
Service Manual Range SMC 0003B VDSC530 536 548 5 Series Dual Fuel53 pg
Covers this model

Bulletin

DSI board fault codes1 pg
Covers this model

Tech Tip

Adjusting oven temperature offsets35 pg
Covers this model

Job Aid

Window Pack Insulation Repair6 pg
Covers this model

MyPros+ Max

Diagnose your Viking VDSC548.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Viking Oven

1 flash every 4 sec on my Viking VDSC548

M+

Normal operation (idle and active

From Service Manual 274623, p.35:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (28)

CodeMeaning

1 flash every 4 secNormal operation (idle and active states) on DSI board.2 flashesRTD (Griddle Probe) fault 2 flashes every 4 secDSI control fault.3 flashes every 4 secIgnition lockout 4 flashes every 4 secGas solenoid fault on DSI board.5 flashes every 4 secDSI control fault.6 flashes every 4 secGas solenoid fault on DSI board.7 flashes every 4 secPower up with channel on 8 flashes every 4 secGas solenoid fault on DSI board.Cooling FanCooling fan fault DSI 1 FlashNormal operation (idle and active states)DSI 2 FlashesDSI control fault DSI 3 FlashesIgnition lockout DSI 4 FlashesGas solenoid fault DSI 5 FlashesDSI control fault DSI 6 FlashesGas solenoid fault DSI 7 FlashesPower up with channel on DSI 8 FlashesGas solenoid fault DSI LED ContinuousDSI control fault DSI No LEDNo power to the DSI module High LimitHigh limit fault LatchDoor latch fault LED on continuouslyDSI control fault.ModelModel identification fault No LEDNo power to the DSI module.RTD (Griddle)Griddle RTD probe fault RTD (Oven Probe)Oven RTD probe fault RTD (Oven)Oven RTD probe fault

Related Viking oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass