Model reference

Viking VGSC536

Range

8 documents19 error codes

Available documentation

Service Manual

Service Manual - 30, 36, & 48 Inch Self-Clean Gas Ranges52 pg
Covers this model
Service Manual - 30, 36, & 48 Inch Self-Clean Gas Ranges51 pg
Covers this model

Bulletin

Service disconnect harness connection overheating1 pg
Covers this model
Igniter Insulation Sleeve Bulletin1 pg
Covers this model
DSI board fault codes1 pg
Covers this model

Service Flash

Instruction Sheet ISC-0036A for TC-0082A-SP13 pg
Covers this model

Job Aid

ISC–0010 EOC board with harness kit2 pg
Covers this model
Service Disconnect Harness Instructions for VGSC53614 pg
Covers this model

MyPros+ Max

Diagnose your Viking VGSC536.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Viking Range

1 flash on my Viking VGSC536

M+

Normal DSI operation (idle and active

From Service Manual 988710, p.42:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (19)

CodeMeaning

1 flashNormal DSI operation (idle and active states).2 flashesRTD (Oven Probe) error 2 flashes (DSI)DSI control fault.3 flashesModel Header error on the thermostat control (48" LH oven and griddle).3 flashes (DSI)Ignition lockout 4 flashes (DSI)Gas solenoid fault.5 flashes (DSI)DSI control fault.6 flashes (DSI)Gas solenoid fault.7 flashes (DSI)Power up with channel on.8 flashes (DSI)Gas solenoid fault.Cycle 1s ON-1s OFF / Clean OFFRTD (Oven Probe) error on 30", 36" and 48" RH oven.Cycle 2 flashes / Clean ONModel error on 30", 36" and 48" RH oven self-cleaning oven control board.Cycle 3 flashes / Clean ONA/D Stuck error on 30", 36" and 48" RH oven self-cleaning oven control board.Cycle 4 flashes / Clean ONFan Hall error on 30", 36" and 48" RH oven self-cleaning oven control board.Cycle flashing / Clean OFFRTD (Oven Probe) error on 30", 36" and 48" RH oven.Cycle OFF / Clean 1s ON-1s OFFLatch error on 30", 36" and 48" RH oven self-cleaning oven control board.Cycle OFF / Clean flashingLatch error on 30", 36" and 48" RH oven self-cleaning oven control board.LED on continuouslyDSI control fault.No LEDNo power to the DSI module

Related Viking range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass