Model reference

Whirlpool WOD51EC0AW02

Oven

12 documents28 error codes13 service modes

Available documentation

Tech Sheet

techsheet w10507057 revb32 pg
Covers this model

Service Flash

Technical Service Pointer9 pg
Covers this model
Technical Service Pointer W10563362A - Warming Drawer Handle Heat Concern5 pg
Covers this model
Technical Service Pointer #W10563362B5 pg
Covers this model
Technical Service Pointer - W10557748 (Speed Blower)6 pg
Covers this model
Technical Service Pointer - W10538829 - Rev A (Cooling Fan)3 pg
Covers this model
Service Pointer - W10563362 - Rev B (Warming Drawer Handle)5 pg
Covers this model
Service Pointer - W11437808 - Rev B - Over Air Software Update6 pg
Covers this model

Tech Tip

installerlabel-w10643344-reva.pdf2 pg
Covers this model

Other

BUILT-IN ELECTRIC SINGLE AND DOUBLE OVEN Use & Care Guide40 pg
Covers this model
W106894086 pg
Covers this model

Installation Guide

Installation Instructions28 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool WOD51EC0AW02.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Oven

E0 F1 on my Whirlpool WOD51EC0AW02

M+

Internal error on MRC board.

From Tech Sheet W10030048, p.20:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (28)

CodeMeaning

E0 F1Internal error on MRC board.E1 F1Internal error on MRC board.E7 F1Internal error on MRC board.E9 F1Internal error on MRC board.F1-E0Internal error on MRC board.F1-E1Internal error on MRC board.F1-E7Internal error on MRC board.F1-E9Internal error on MRC board.F2 E0Keypad disconnected from MRC board.F2 E1Stuck key on keypad.F2 E2Invalid keypad detected.F2 E3Cancel key error on keypad.F2-E0Keypad disconnected from MRC board.F2-E1Stuck key detected on keypad.F2-E2Invalid keypad detected.F2-E3Cancel key error on keypad.F3 E0Main oven sensor open or shorted (upper cavity on single or double oven).F3 E1Main oven sensor open or shorted (lower cavity on double oven).F3-E0Main oven temperature sensor open or shorted (upper cavity on single or double…F3-E1Main oven temperature sensor open or shorted (lower cavity on double oven).F5 E0Door and latch switches do not agree.F5 E1Latch not operating.F5-E0Door and latch switches do not agree.F5-E1Latch not operating.F6 E1Over temperature during cooking.F6 E2Over temperature during cleaning.F6-E1Over temperature during cooking.F6-E2Over temperature during cleaning.

Service modes (13)

Auto Test Mode1
Control Reset1
Diagnostics ModePress CANCEL > CANCEL > START
Fault Display Reset1
Oven Temperature Calibration (Double Oven)1
Oven Temperature Calibration (Single Oven)1
Software Version1
Temperature Calibration - Double Oven1
Temperature Calibration - Single Oven1
Temperature Calibration (Double Oven)1
Temperature Calibration (Single Oven)1
Test Mode (Relay Activation)1
Usage Codes1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass