Model reference
Whirlpool MES5752BAB15
Range
8 documents15 error codes18 service modes
Available documentation
Tech Sheet
- Electric Slide-In Range⎯Technical Information11 pg
Bulletin
- Technical Bulletin - Hot Surface Indicator Light Change1 pg
- Installation Bulletin1 pg
- Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Service Flash
- Service Pointer - PF Error Code and/or Slow Running Clock5 pg
Installation Guide
- Installation Instructions24 pg
- Installation Bulletin2 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Whirlpool MES5752BAB15.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (15)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control circuit board.1c31Cancel key circuit problem (cancel key improper value).1c6cEEPROM error (no response from EEPROM).1c7cControl not calibrated (calibration value out of range).1c8cCooking program error (CRC invalid).1d11Runaway oven temperature (650°F) with door unlocked; sensor resistance > 2237…1d21Runaway oven temperature (950°F) with door locked; sensor resistance > 2787…3d11Temperature sensor open (sensor resistance > Infinite Ohms).3d21Temperature sensor shorted (sensor resistance > 0 Ohms).4d11Door switch not closed when door is locked (door switch position failure).4d51Door switch not open or closed (door switch circuit failure).9d11Latch will not lock (lock switch not closed).9d21Latch will not unlock (unlock switch not closed)9d31Latch state unknown, both locked and unlocked switches closed simultaneouslyService modes (18)
- 24 Hour Clock Toggle (M1 - MES5752BA*)Press and hold Cancel and Delay pads for 3 to 5 seconds
- 24 Hour Clock Toggle (M2 - AES3760BA*)Press and hold Cancel and Favorite pads for 3 to 5 seconds.
- Child Lockout (M1 - MES5752BA*)Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
- Child Lockout (M2 - AES3760BA*)Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds
- Clock Display Toggle (M1 - MES5752BA*)Press and hold Cancel and Clock pads for 3 to 5 seconds.
- Clock Display Toggle (M2 - AES3760BA*)Press and hold Cancel and Clock pads for 3 to 5 seconds.
- Diagnostic Code Display Mode (M1 - MES5752BA*)Press and hold (slew up) pad within 60 seconds of powering up the unit
- Diagnostic Code Display Mode (M2 - AES3760BA*)Press and hold Up Arrow pad and Power Up the unit
- Factory Default Reset (M1 - MES5752BA*)Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
- Factory Default Reset (M2 - AES3760BA*)Press and hold Cancel and Keep Warm pads for 3 to 5 seconds.
- Oven Temperature Adjustment (M1 - MES5752BA*)1
- Oven Temperature Adjustment (M2 - AES3760BA*)1
- Quick Test Mode (M1 - MES5752BA*)1. Press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Once the control has entered Quick…
- Quick Test Mode (M2 - AES3760BA*)1. Press and hold CANCEL and BROIL pads for 3 to 5 seconds. 2. Once the control has entered Quick…
- Sabbath Mode (M1 - MES5752BA*)Hold Clock pad for 3 to 5 seconds to activate
- Sabbath Mode (M2 - AES3760BA*)Hold CLOCK pad for 3 to 5 seconds to activate.
- Temperature Display Toggle (M1 - MES5752BA*)Press and hold Cancel and Bake pads for 3 to 5 seconds
- Temperature Display Toggle (M2 - AES3760BA*)Press and hold Cancel and Bake pads for 3 to 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass