mypros+
Error code reference

Amana Dryer Error Code FE

Power source frequency error

Amana codesAmana dryer codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the FE error code actually means

Your Amana dryer is detecting that the electrical power coming into the machine is running at the wrong frequency, meaning it does not match what the dryer expects from a standard home outlet. This can happen if the dryer is plugged into a generator or another non-standard power source. If the dryer is connected to a regular home outlet and the error persists, there may be an internal electronic problem that needs professional attention.

Diagnostic procedure

The full FE procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check that a regular power source is being used and check for invalid power frequency sense circuit.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock FE procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of FE

Ranked by how often they cause this code
  1. 1Non-standard power source in use
  2. 2Unstable or fluctuating utility power
  3. 3Faulty frequency sense circuit on control board
  4. 4Failed main control board

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about FE

What does FE mean on a Amana dryer?
The FE code on an Amana dryer stands for a power source frequency error. It means the control board has detected that the incoming AC power frequency is outside the expected range. This can be caused by using a non-standard power source like a generator, or by a fault in the internal frequency sense circuit on the control board.
Will resetting the dryer clear the FE error code?
A reset may temporarily clear the FE code, but if the underlying cause is still present, such as an improper power source or a faulty control board, the error will return. Resetting is a useful first step to confirm whether the issue is intermittent, but it is not a permanent fix for a hardware fault.
How much does it cost to repair the FE error on an Amana dryer?
If the fix is simply switching to a standard power outlet, there is no parts cost involved. If the main control board needs to be replaced due to a failed frequency sense circuit, repair costs including parts and labor typically range from around $150 to $350, depending on the specific board and local labor rates.
Can I fix the FE error on my Amana dryer myself?
If the dryer is connected to a generator or non-utility power source, switching it to a standard home outlet may clear the error immediately. If the dryer is already on standard utility power, the issue likely lies with the main control board's frequency sense circuit, which typically requires a trained technician to diagnose and replace the board.
Is it safe to use my Amana dryer when the FE code is showing?
The dryer may halt operation when the FE code is active as a protective measure. Continuing to run the dryer on a non-standard or unstable power source could risk damage to the control electronics. It is best to stop using the dryer and identify the power source issue before attempting to resume normal operation.

Related Amana dryer error codes

All Amana dryer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass