Bosch Dishwasher Error Code Er:14

Er:14 means the dishwasher has detected a water level that exceeds the safe overflow threshold. The control board shuts down the wash cycle automatically to prevent flooding. This fault typically points to a problem with the drain pump, drain hose, or inlet valve. Diagnostic test P9 can be run to help isolate the faulty component.

No, you should not run the dishwasher while Er:14 is active. The code indicates a water overflow risk, and running the machine without resolving the underlying fault could result in water damage to your floor, cabinetry, or surrounding appliances. Leave the unit off until the cause has been diagnosed and repaired.

Repair costs vary depending on the faulty component. A drain hose replacement or a simple pump filter cleaning may cost relatively little, generally in the range of $20 to $80 for parts if self-repairing. A replacement drain pump or inlet valve, including labor from a technician, typically ranges from $150 to $350 depending on the specific model and local labor rates.

Start by inspecting the drain hose for kinks, clogs, or improper installation height. Next, check the drain pump filter for debris and confirm the pump operates during the drain cycle. If the hose and pump appear normal, test the inlet valve to ensure it closes fully when de-energized. Running Bosch diagnostic test P9 will help confirm which component is causing the overflow condition.

A reset may clear the code temporarily, but it will not fix the underlying problem. If the drain pump is blocked, the inlet valve is faulty, or the hose is improperly routed, the overflow condition will recur and the code will return. The root cause must be identified and corrected for the fault to stay cleared.