Bosch Dishwasher Error Code F00

F00 means the dishwasher's fault memory contains no recorded errors. It is a status code that appears during diagnostic or service mode, indicating the control board has not logged any fault events. This is not an error condition and does not indicate a problem with the appliance.

Yes, F00 poses no safety concern. It simply confirms that the control board has no logged faults at the time of the diagnostic check. The appliance is safe to operate normally.

If F00 appears and the machine is working correctly, no diagnostic service is needed and there is no cost. If you called a technician to investigate a complaint and F00 was the result, you would typically only be responsible for the standard service call fee, which generally ranges from $75 to $150 depending on your location and the service provider.

No repair is required for F00 itself, as it indicates no faults are stored. If your dishwasher is running normally, no action is needed. If you are experiencing performance issues despite seeing F00, run a complete wash cycle and recheck the fault memory, as an intermittent problem may then register a specific code.

F00 is not a fault that needs to be cleared. It is a readout confirming an empty fault log. Performing a reset will not change this status in any meaningful way, since there is nothing stored in memory to remove.