mypros+
Error code reference

Bosch Range Error Code F125

Cancel touch key voltage out of limits; checked always with 1 minute fault limit.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the F125 error code actually means

Your Bosch range has detected a problem with the Cancel button on the control panel, specifically that the electrical signal from that button is reading at an abnormal level. This could mean the button is stuck, damaged, or there is an issue with the wiring or electronics behind the panel. The range flagged this after the problem persisted for at least one minute, so it is not a one-time glitch.

Diagnostic procedure

The full F125 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F125 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of F125

Ranked by how often they cause this code
  1. 1Stuck or physically damaged Cancel key
  2. 2Moisture or grease contamination on the touch panel
  3. 3Damaged or loose ribbon cable or wiring connector
  4. 4Faulty touch key panel assembly
  5. 5Main control board failure

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about F125

What does F125 mean on a Bosch range?
F125 indicates that the voltage signal from the Cancel touch key on the control panel has gone outside of acceptable limits. The control board monitors this signal continuously and only triggers the fault after the condition persists for a full minute. This points to a problem with the Cancel key itself, the wiring between the panel and the board, or the control board.
Is it safe to use my Bosch range while F125 is showing?
An F125 fault related to the Cancel key circuit can affect your ability to cancel or stop cooking functions reliably. Until the fault is resolved, you may not be able to trust that the Cancel key will respond correctly in an emergency situation. It is advisable to resolve the fault before relying on the range for normal cooking, particularly for timed or unattended operations.
How much does it cost to repair a Bosch range F125 error?
Repair costs vary depending on which component has failed. A touch key panel assembly replacement typically falls in the range of $80 to $200 for parts, while a main control board can cost $150 to $400 or more depending on the model. Adding professional labor will increase the total, generally by $100 to $200 depending on your area and the technician. If the fix is simply cleaning the panel or reseating a connector, you may have no parts cost at all.
Can I fix F125 on my Bosch range myself?
Some causes of F125 are DIY-friendly. Start by cleaning the control panel surface to remove any moisture or grease that could be affecting the Cancel key signal, then power cycle the range to see if the error clears. If the issue persists, checking the ribbon cable connection is a feasible next step for someone comfortable working with appliance electronics. Replacing the touch panel assembly or main control board typically requires more technical skill and the correct replacement parts.
Will resetting my Bosch range clear the F125 error?
A power cycle reset, done by turning off the circuit breaker for about 30 seconds and restoring power, may temporarily clear the F125 code. However, because the fault requires the out-of-range voltage to persist for one minute before triggering, if the underlying hardware issue remains, the code will return. A reset is a useful diagnostic step but not a permanent fix unless the root cause has been corrected.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass