Daikin Heat Pump Error Code 00

Code 00 on a Daikin heat pump means normal operation with no fault currently detected. It is not an error in the traditional sense; it is the system's way of confirming that all monitored circuits and sensors are within acceptable parameters. You may see this code appear after a fault has been cleared or simply when the system is operating without any issues.

Yes, code 00 confirms the system is operating normally and there are no active faults detected. It is completely safe to continue running the unit. If you suspect a problem based on performance rather than a displayed error, have the fault history reviewed by a qualified technician.

Code 00 does not require any repair, as it indicates normal system operation with no fault detected. There is no associated repair cost for this code. If a technician is called out to investigate a complaint and finds code 00 with no fault history, you may only incur a standard diagnostic service call fee, which typically ranges from around $75 to $150 depending on your location and service provider.

No corrective action is required for code 00 itself, as it indicates normal operation. However, if you are investigating a reported performance issue, you should retrieve the unit's fault history log to check for any previously stored codes. An intermittent problem may have temporarily resolved while still leaving a record in the system's memory.

Code 00 is not an error that needs to be cleared. It is the default no-fault status code and will remain displayed as long as the system is operating normally. Performing a reset will not change this code because there is no active fault present to clear.