mypros+
Error code reference

Electrolux Ice Maker Error Code STEADY

LED steady light indicates the control board has power and operation is normal.

Electrolux codesElectrolux ice maker codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the STEADY error code actually means

A steady LED light on your Electrolux ice maker is a good sign, not a problem. It simply means the ice maker has power and the control board is working as it should. No action is needed based on this indicator alone.

Diagnostic procedure

The full STEADY procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock STEADY procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of STEADY

Ranked by how often they cause this code
  1. 1Normal powered operation
  2. 2Unit in standby mode
  3. 3Ice bin full, production paused
  4. 4Recently restored power

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about STEADY

What does STEADY mean on a Electrolux ice_maker?
A steady LED on an Electrolux ice maker indicates that the control board has power and is operating normally. It is a status indicator, not a fault or error code. No troubleshooting or repair action is required based on this light alone.
Is a steady LED on my Electrolux ice maker a safety concern?
A steady LED is not a safety concern. It simply confirms that the control board is receiving power and functioning correctly. Safety-related faults are typically indicated by blinking LED patterns or an absence of the light entirely.
Will resetting my Electrolux ice maker clear the steady LED?
A reset will not change the steady LED because it is not an error condition that needs clearing. After a reset, once the control board powers back up and confirms normal operation, the LED will return to a steady state as expected.
Do I need to fix anything if my Electrolux ice maker shows a steady LED?
No repair is needed for a steady LED, as it confirms normal powered operation. If the unit is not making ice despite the steady light, the issue lies elsewhere, such as with the water supply, inlet valve, or ice level sensor, not the control board itself.
How much does it cost to address a steady LED on an Electrolux ice maker?
Because a steady LED indicates normal operation rather than a fault, there is typically no repair cost associated with it. If you are experiencing a related issue such as no ice production, diagnostic service calls generally range from $75 to $150 depending on your location and service provider.

Related Electrolux ice maker error codes

All Electrolux ice maker codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass